当前位置: X-MOL 学术J. Mach. Manuf. Reliab. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Simulation of Thermal Processes in a Heating System
Journal of Machinery Manufacture and Reliability ( IF 0.4 ) Pub Date : 2021-05-04 , DOI: 10.3103/s105261882102014x
A. A. Shulzhenko , M. B. Modestov

Abstract

In this article, by means of mathematical modeling, propagation of the response to a heat signal in the “human body–a gap–woven electric heater–heat-insulating layer–environment” heating system is analyzed. On the base of this study, we discover that the woven electric heater can act not only as a heater, but also as a receiver of external thermal signals caused by the impact of the heater on a person; it is a novelty. It is possible due to a particular combination of the physicotechnical parameters of the heater with the parameters of all other elements included in the system that performs the contact heating of the person. The investigation results might be of interest for various profile physicians as well as specialists involved in development of the heater-based devices including woven ones.



中文翻译:

加热系统中的热过程模拟

摘要

在本文中,通过数学建模,分析了在“人体-缝隙-编织电加热器-隔热层-环境”加热系统中对热信号的响应传播。在这项研究的基础上,我们发现编织电加热器不仅可以起加热器的作用,而且还可以起因加热器对人的撞击而引起的外部热信号的接收器的作用。这是一个新颖的事物。由于加热器的物理技术参数与执行人的接触加热的系统中包括的所有其他元件的参数的特定组合,因此是可能的。该调查结果可能对各种简介医师以及参与开发包括编织装置在内的基于加热器的装置的专家感兴趣。

更新日期:2021-05-05
down
wechat
bug