当前位置: X-MOL 学术Analog Integr. Circ. Signal Process. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
A low-power low-noise multi-stage transimpedance amplifier for amperometric based blood glucose monitoring systems
Analog Integrated Circuits and Signal Processing ( IF 1.2 ) Pub Date : 2020-02-28 , DOI: 10.1007/s10470-020-01600-5
Kavyashree Puttananjegowda , Sylvia Thomas

Abstract

In this paper, the design of low-noise, low-power transimpedance amplifier (TIA) is presented for a miniaturized amperometric based continuous blood glucose monitoring system for wearable devices. The proposed multi-stage cascode common source transimpedance amplifier circuit is designed and implemented in a 180 nm CMOS technology. It has been demonstrated that the proposed TIA shows a significant increase in transimpedance gain, 1.72 GΩ with a bandwidth of 180 kHz and input referred current noise is 18 fA/√Hz for an input current of 200 pA. The total power consumption is 52 μW with a 1.4 V supply and occupies a chip area of 110 μm × 140 μm.



中文翻译:

用于基于安培计的血糖监测系统的低功耗低噪声多级跨阻放大器

摘要

本文针对用于可穿戴设备的基于微型安培的连续血糖监测系统,提出了低噪声,低功率跨阻放大器(TIA)的设计。拟议的多级共源共栅共源跨阻放大器电路是在180 nm CMOS技术中设计和实现的。已经证明,提出的TIA在180 kHz的带宽下,跨阻增益显着提高,为1.72GΩ,对于200 pA的输入电流,输入参考电流噪声为18 fA /√Hz。使用1.4 V电源时,总功耗为52μW,占用的芯片面积为110μm×140μm。

更新日期:2020-03-02
down
wechat
bug