TiO₂, as a photoactive semiconductor material, where like photocatalysis technology is a hot topic of research in recent years, shows great potential for application in the direction of environmental pollution treatment and solar-chemical energy conversion. In this paper, we prepared titanium dioxide nanotube arrays (TNAs) by a simple one-step anodic oxidation method in an ethylene glycol electrolyte containing ammonium fluoride under optimized conditions. The effects of anodic oxidation voltage, anodic oxidation time and annealing temperature on the growth of TNAs were systematically investigated. It was shown that the sample parameters of TNAs prepared by anodic oxidation were influenced by the anodic oxidation conditions, and the tube diameter and anodic oxidation voltage were positively correlated in a certain range. The TNAs with the best characterization performance were selected for photocatalytic degradation, and methylene blue (MB) was used to simulate the organic pollutants. The results show that TNAs have better photocatalytic activity compared with conventional TiO₂. On the basis of this, stearic acid (SA) and TNAs were compounded and modified. The TNAs were made to obtain superhydrophobic properties. The photocatalytic degradation experiments were carried out on them. The results show that the superhydrophobic modification does not affect their photocatalytic activity, so it is possible to achieve photocatalytic degradation of water pollution under the premise of superhydrophobicity, which has greater application prospects in water pollution treatment.