当前位置:
X-MOL 学术
›
Exp. Heat Transf.
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Effect of triangular cross-sectional transverse wedge on the performance of an inline tube bundle heat exchanger
Experimental Heat Transfer ( IF 3.5 ) Pub Date : 2023-01-27 , DOI: 10.1080/08916152.2023.2171161 Pasada Yisunzam 1 , Anusorn Chinsuwan 2
中文翻译:
三角形横截面横楔对直列管束换热器性能的影响
更新日期:2023-01-27
Experimental Heat Transfer ( IF 3.5 ) Pub Date : 2023-01-27 , DOI: 10.1080/08916152.2023.2171161 Pasada Yisunzam 1 , Anusorn Chinsuwan 2
Affiliation
ABSTRACT
In order to have a heat transfer per volume, heat exchangers have to have high overall heat coefficient. The effects of a transverse wedge on the heat transfer, the pressure drop, and the thermal efficiency factor (TEF) of air flow through a tube bundle heat exchanger was investigated. TEF increases continuously with the wedge aspect ratio (α). Form α = 0.275, 0.550, 0.758 to 1, TEF increases continuously from 1.157 to 1.84, 1.11 to 1.72, 1.05 to 1.42, and 1.02 to 1.39 for x/L = 1/3, 2/3, 1, and 0, respectively.
中文翻译:
三角形横截面横楔对直列管束换热器性能的影响
摘要
为了实现单位体积的热传递,换热器必须具有高总热系数。研究了横向楔对通过管束换热器的空气流的传热、压降和热效率系数 (TEF) 的影响。TEF 随着楔形纵横比 (α) 的增加而不断增加。形式 α = 0.275、0.550、0.758 到 1,对于 x/L = 1/3、2/3、1 和 0,TEF 分别从 1.157 到 1.84、1.11 到 1.72、1.05 到 1.42 和 1.02 到 1.39 连续增加.