Novel slide compression anatomic plates of the femoral neck for treating unstable femoral neck fracture: A biomechanical study,Journal of Orthopaedic Research

当前位置： X-MOL 学术 › J. Orthop. Res. › 论文详情

Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)

Novel slide compression anatomic plates of the femoral neck for treating unstable femoral neck fracture: A biomechanical study
Journal of Orthopaedic Research ( IF 2.1 ) Pub Date : 2022-09-18 , DOI: 10.1002/jor.25447
Jia Li _{1,

2} , Pengbin Yin _{1,

2} , Jiantao Li _{1,

2} , Zhe Zhao ₃ , Jingxin Zhao _{1,

2} , Xiang Cui _{1,

2} , Houchen Lyu _{1,

2} , Licheng Zhang _{1,

2} , Peifu Tang _{1,

2}

Affiliation

To compare the biomechanical stability of slide compression anatomic plates of the femoral neck, cannulated compression screws and dynamic hip screws with derotation screws for stabilizing unstable femoral neck fractures (Pauwels angle = 70°). Pauwels III femoral neck fractures were created on 45 Sawbones femurs and randomly assigned to three implant groups (1:1:1). The biomechanical stability of all Sawbones in each treatment group was evaluated with three tests. First, in the static loading test, the load–displacement curve, vertical stiffness (load/vertical displacement [N/mm]) and 5 mm failure load were recorded. Second, in the incremental cyclic loading test (700, 1000, and 1400 N), the cyclic−displacement curve and the displacement of the fragments were recorded. Third, in the torsion test, the torsional rigidity, maximum torque, and torsional angle corresponding to the maximum torque were recorded. The static compression test showed that slide compression anatomic place-femoral neck (SCAP-FN) had the largest vertical stiffness (275 ± 11 N/mm, p < 0.01) and 5 mm failure load (1232 ± 156, p < 0.01). The cyclic loading test showed that SCAP-FN had the lowest change in displacement after 30000 cycles of loading. The torsional stiffness and the maximum torque followed the order SCAP-FN > dynamic hip screw systems (DHS) + derotational screw (DS) > CCS, and the torsional angle corresponding to the maximum torque followed the order SCAP-FN < DHS + DS < CCS. The SCAP-FN construct provides stiffness and stability compared with other standard fixation techniques (3CS and DHS + DS). The fixation strategy of SCAP-FN might be sufficient for clinical use, indicating studies in the human body are warranted.

更新日期：2022-09-18

点击分享查看原文

点击收藏

阅读更多本刊最新论文本刊介绍/投稿指南11