Natural Ball Clay Ceramic Membrane Fabrication Using Full Factorial Design for Screening,Chemical Engineering & Technology

当前位置： X-MOL 学术 › Chem. Eng. Technol. › 论文详情

Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)

Natural Ball Clay Ceramic Membrane Fabrication Using Full Factorial Design for Screening
Chemical Engineering & Technology ( IF 1.8 ) Pub Date : 2022-08-22 , DOI: 10.1002/ceat.202200093
Fazureen Azaman ₁ , Mohd Al Amin Muhamad Nor ₂ , Wan Rafizah Wan Abdullah ₁ , Mohd Hasmizam Razali ₂ , Rumaizah Che Zulkifli ₂ , Asmadi Ali ₁

Affiliation

A screening design is used to assess a large number of process or design parameters to identify the most influential factors that affect the process performance. This study investigates factors affecting the fabrication of natural ball clay (NBC) ceramic membranes using the 2⁴ full factorial design (FFD) with two replications at each point. The factors studied were: particle size of the sawdust, percentage of sawdust, amount of binder, and sintering temperature. The FFD study results indicated that the sawdust particle size and the percentage of sawdust had a positive impact on the porosity and mechanical strength of the NBC ceramic membrane. This demonstrates the importance of performing a screening experiment prior to an extensive investigation of certain factors such as in the optimization studies.

中文翻译：

用于筛选的全因子设计的天然球粘土陶瓷膜制造

筛选设计用于评估大量工艺或设计参数，以确定影响工艺性能的最有影响力的因素。本研究使用 2 ⁴全因子设计 (FFD) 研究了影响天然球粘土 (NBC) 陶瓷膜制造的因素，每个点重复两次。研究的因素是：锯末的粒度、锯末的百分比、粘合剂的量和烧结温度。FFD研究结果表明，锯末粒径和锯末百分比对NBC陶瓷膜的孔隙率和机械强度有积极影响。这证明了在对某些因素进行广泛调查（例如优化研究）之前进行筛选实验的重要性。

更新日期：2022-08-22

点击分享查看原文

点击收藏

阅读更多本刊最新论文本刊介绍/投稿指南11