当前位置: X-MOL 学术Electrophoresis › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Qualitative and quantitative aspects of time-, charge-, and mobility-based electropherograms
Electrophoresis ( IF 2.9 ) Pub Date : 2022-08-19 , DOI: 10.1002/elps.202200195
Eric Tavares da Costa 1 , Daniel Rossado Oliveira 1 , Claudimir Lucio do Lago 1
Affiliation  

The migration process in capillary electrophoresis is obtained by using a high-voltage power supply, and the basic idea is to keep the control on the migration velocity of the analytes by controlling either the applied voltage or current. The effectiveness of this control has impact on the resulting electropherogram and, thus, in the identification and quantification of the analytes. Although the usual electropherogram is the record of the detector signal as a function of time, other two domains should be considered: charge and mobility. Both mathematical modeling and experimental results were used to evaluate the two different approaches for controlling the electrophoretic migration and the resulting time-, charge-, and mobility-based electropherograms. The main conclusions are (1) the current-controlled mode is superior to the voltage-controlled mode; (2) when the first mode cannot be implemented, the electrophoretic current should be monitored to improve the identification and quantification procedures; and (3) the consistent monitoring of the electrophoretic current allows the implementation of the charge-based electropherogram and the mobility spectrum. The first one is advantageous because the peak position is more reproducible, and the peak area is more resistant to change than the ones from the time-based electropherogram. The mobility spectrum has the additional advantage of being more informative about the mobility of the analytes. Although peak area is less robust, the spectrum may also be used for quantitation when the number of plates is greater than 103.

中文翻译:

基于时间、电荷和迁移率的电泳图的定性和定量方面

毛细管电泳中的迁移过程是通过使用高压电源获得的,其基本思想是通过控制施加的电压或电流来控制分析物的迁移速度。这种控制的有效性会影响生成的电泳图,从而影响分析物的鉴定和定量。虽然通常的电泳图是检测器信号随时间变化的记录,但还应考虑其他两个域:电荷和迁移率。数学建模和实验结果都用于评估控制电泳迁移的两种不同方法以及由此产生的基于时间、电荷和迁移率的电泳图。主要结论是:(1)电流控制模式优于电压控制模式;(2) 当第一种模式无法实施时,应监测电泳电流以改进鉴定和定量程序;(3) 对电泳电流的持续监测允许实施基于电荷的电泳图和迁移率谱。第一个是有利的,因为峰位置更可重现,并且峰面积比基于时间的电泳图中的那些更能抵抗变化。淌度谱还有一个额外的优势,即可以提供更多关于分析物淌度的信息。尽管峰面积不太稳健,但当塔板数大于 10 时,光谱也可用于定量 (2) 当第一种模式无法实施时,应监测电泳电流以改进鉴定和定量程序;(3) 对电泳电流的持续监测允许实施基于电荷的电泳图和迁移率谱。第一个是有利的,因为峰位置更可重现,并且峰面积比基于时间的电泳图中的那些更能抵抗变化。淌度谱还有一个额外的优势,即可以提供更多关于分析物淌度的信息。尽管峰面积不太稳健,但当塔板数大于 10 时,光谱也可用于定量 (2) 当第一种模式无法实施时,应监测电泳电流以改进鉴定和定量程序;(3) 对电泳电流的持续监测允许实施基于电荷的电泳图和迁移率谱。第一个是有利的,因为峰位置更可重现,并且峰面积比基于时间的电泳图中的那些更能抵抗变化。淌度谱还有一个额外的优势,即可以提供更多关于分析物淌度的信息。尽管峰面积不太稳健,但当塔板数大于 10 时,光谱也可用于定量 (3) 对电泳电流的持续监测允许实施基于电荷的电泳图和迁移率谱。第一个是有利的,因为峰位置更可重现,并且峰面积比基于时间的电泳图中的那些更能抵抗变化。淌度谱还有一个额外的优势,即可以提供更多关于分析物淌度的信息。尽管峰面积不太稳健,但当塔板数大于 10 时,光谱也可用于定量 (3) 对电泳电流的持续监测允许实施基于电荷的电泳图和迁移率谱。第一个是有利的,因为峰位置更可重现,并且峰面积比基于时间的电泳图中的那些更能抵抗变化。淌度谱还有一个额外的优势,即可以提供更多关于分析物淌度的信息。尽管峰面积不太稳健,但当塔板数大于 10 时,光谱也可用于定量 并且峰面积比基于时间的电泳图的峰面积更耐变化。淌度谱还有一个额外的优势,即可以提供更多关于分析物淌度的信息。尽管峰面积不太稳健,但当塔板数大于 10 时,光谱也可用于定量 并且峰面积比基于时间的电泳图的峰面积更耐变化。淌度谱还有一个额外的优势,即可以提供更多关于分析物淌度的信息。尽管峰面积不太稳健,但当塔板数大于 10 时,光谱也可用于定量3 .
更新日期:2022-08-19
down
wechat
bug