Additive manufacturing is accelerating in hypersonic speed, which touched upon almost all the nook and corners of the manufacturing sector. The present stage wherein a 3D printer is capable of printing queer hybrid materials was not imagined through conventional manufacturing albeit it is meager existence in a few instances. Its expendable arms stretch to the maximum level that is even clearly addressed in Industry 4.0 too, by making at least a printer in a company for printing specific customized materials. The dream of printing composite material was been a long-term goal for researchers worldwide. This article primarily focuses on this niche area of printing natural fiber composite materials that too specifically jute fiber-reinforced composites. Very few pieces of literature are available on additive manufacturing of specific natural fibers. As the technique for printing natural fiber-reinforced composites is still under evolution, this study will be more interesting as it consolidates the facts and figures involved in 3D of jute fiber reinforced composites alone. Different forms of jute fibers used by the researchers include weaved jute, jute as continuous fiber, filament along with jute, jute fiber as reinforcement, jute used as rope as well as jute fiber as cement matrix and all these forms have been addressed in this review.

中文翻译：

---

黄麻纤维增强聚合物复合材料的增材制造：材料形式和方法的简要回顾

增材制造正在以高超音速加速，几乎触及了制造业的所有角落。传统制造无法想象 3D 打印机能够打印奇怪混合材料的现阶段，尽管在少数情况下它是微不足道的。通过在公司中制造至少一台打印机来打印特定的定制材料，它的消耗性手臂延伸到了工业 4.0 中甚至明确解决的最大水平。打印复合材料的梦想是全世界研究人员的长期目标。本文主要关注打印天然纤维复合材料的这一利基领域，特别是黄麻纤维增强复合材料。关于特定天然纤维的增材制造的文献很少。由于打印天然纤维增强复合材料的技术仍在发展中，这项研究将更加有趣，因为它整合了仅涉及黄麻纤维增强复合材料 3D 的事实和数据。研究人员使用的不同形式的黄麻纤维包括编织黄麻、作为连续纤维的黄麻、长丝与黄麻、作为增强材料的黄麻纤维、用作绳索的黄麻以及作为水泥基体的黄麻纤维，所有这些形式都在这篇综述中得到了解决.