当前位置: X-MOL 学术Robot. Intell. Autom. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Model predictive control of direct-driven surface-mounted permanent magnet synchronous generator based on active disturbance rejection controller
Robotic Intelligence and Automation ( IF 1.9 ) Pub Date : 2021-11-03 , DOI: 10.1108/aa-04-2021-0042
Hongjun Shi 1 , Lei Xiong 1 , Xuchen Nie 2 , Qixin Zhu 3
Affiliation  

Purpose

This paper aims to mainly discuss how to suppress the disturbances accurately and effectively in the wind energy conversion system (WECS) of the direct drive surface mount permanent magnet synchronous generator (SPMSG).

Design/methodology/approach

The disturbances in wind energy conversion system have seriously negative influence on the maximum power tracking performance. Therefore, a model predictive control (MPC) method of model compensation active disturbance rejection control (ADRC) strategy in parallel connection is designed, which optimizes the speed tracking performance compared with the existing control strategy of MPC and ADRC in series connection. Based on the traditional ADRC, a multi parameter model compensation ADRC strategy is added to better estimate the disturbances. At the same time, a torque feedback strategy is added to compensate the disturbances caused by load torque and further optimize the speed loop tracking performance.

Findings

The simulation results show that the designed control method has advantages than the traditional control method in compensating the disturbances and tracking the maximum power more effectively.

Originality/value

The simulation results show that the designed control method is superior to the traditional proportional control method, which can better compensate the internal and external disturbances and track the maximum power more effectively.



中文翻译:

基于自抗扰控制器的直驱式表贴永磁同步发电机模型预测控制

目的

本文旨在主要讨论如何准确有效地抑制直驱表面贴装永磁同步发电机(SPMSG)风能转换系统(WECS)中的扰动。

设计/方法/方法

风能转换系统中的扰动对最大功率跟踪性能有严重的负面影响。为此,设计了一种模型补偿自抗扰控制(ADRC)并联策略的模型预测控制(MPC)方法,与现有的MPC和ADRC串联控制策略相比,优化了速度跟踪性能。在传统ADRC的基础上,增加了多参数模型补偿ADRC策略,以更好地估计扰动。同时,增加转矩反馈策略,补偿负载转矩带来的扰动,进一步优化速度环跟踪性能。

发现

仿真结果表明,与传统控制方法相比,所设计的控制方法在补偿干扰和更有效地跟踪最大功率方面具有优势。

原创性/价值

仿真结果表明,所设计的控制方法优于传统的比例控制方法,能够更好地补偿内外扰动,更有效地跟踪最大功率。

更新日期:2022-01-11
down
wechat
bug