当前位置: X-MOL 学术Dokl. Phys. Chem. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Scale-up of the Solution Combustion Synthesis of Iron Oxides with the Addition of the Inactive Component FeOx
Doklady Physical Chemistry ( IF 1.1 ) Pub Date : 2021-09-22 , DOI: 10.1134/s001250162105002x
Sh. M. Khaliullin 1 , V. D. Zhuravlev 1 , V. G. Bamburov 1 , A. M. Murzakaev 2 , O. V. Russkikh 3
Affiliation  

Abstract

The solution combustion synthesis of iron oxides from nitrate solutions with a dual fuel comprising urea and citric acid on the earlier synthesized FeOx powder was studied. The possibility of the synthesis of up to 100 g of the desired product under laboratory conditions in a relatively small (4 dm3) reactor was demonstrated for the first time. The obtained nanodisperse materials were a well-crystallized mixture of Fe3O4 and α-Fe2O3 oxides. A consistent increase in the weight of the FeOx powder led to an increase in the mass fraction of the α-Fe2O3 phase to 91% at the final stage of the synthesis.



中文翻译:

添加非活性成分 FeOx 的氧化铁溶液燃烧合成的放大

摘要

研究了使用包含尿素和柠檬酸的双燃料在较早合成的 FeO x粉末上从硝酸盐溶液溶液燃烧合成氧化铁。首次证明了在实验室条件下在相对较小 (4 dm 3 ) 反应器中合成高达 100 g 所需产物的可能性。获得的纳米分散材料是Fe 3 O 4和α-Fe 2 O 3氧化物的结晶良好的混合物。FeO x粉末重量的持续增加导致在合成的最后阶段α-Fe 2 O 3相的质量分数增加到91%。

更新日期:2021-09-22
down
wechat
bug