当前位置: X-MOL 学术Plasma Processes Polym. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
High-performance rollable polymer/metal/polymer thin-film heater and heat mirror
Plasma Processes and Polymers ( IF 2.9 ) Pub Date : 2021-09-14 , DOI: 10.1002/ppap.202100098
Sung Hyun Kim 1 , Eunmi Cho 1 , Mac Kim 1 , Sang‐Jin Lee 1
Affiliation  

In this study, we propose high-performance polymer/metal/polymer (HP–PMP) films with simultaneous heat reflection/transparent heater functions. The thickness-optimized HP–PMP films showed a maximum transmittance of 77.12% (86.65% without the base film) at a wavelength of 460 nm, sheet resistance of 5.982 Ω/□, and figure of merit of 12.44 × 10−3 Ω−1 (39.89 × 10−3 Ω−1 without the base film). In the surface heating test, the temperature reached approximately 150°C at an applied voltage of 11 V. In the heat mirror experiment using an infrared lamp, the HP–PMP film showed 85.1% heat shielding, compared to the base film. After the mechanical rolling reliability test, the HP–PMP film did not show any change in resistance after 10 ,000 cycles under a rolling condition of 240°.

中文翻译:

高性能可卷曲聚合物/金属/聚合物薄膜加热器和热镜

在这项研究中,我们提出了具有同时热反射/透明加热器功能的高性能聚合物/金属/聚合物(HP-PMP)薄膜。厚度优化的 HP-PMP 薄膜在 460 nm 波长处的最大透射率为 77.12%(没有基膜时为 86.65%),方块电阻为 5.982 Ω/□,品质因数为 12.44 × 10 -3  Ω - 1 (39.89 × 10 -3  Ω -1不含基膜)。在表面加热测试中,温度在 11 V 的施加电压下达到约 150°C。在使用红外灯的热镜实验中,与基膜相比,HP-PMP 膜显示出 85.1% 的热屏蔽。在机械轧制可靠性试验后,HP-PMP 薄膜在 240° 的轧制条件下经过 10,000 次循环后没有表现出任何电阻变化。
更新日期:2021-09-14
down
wechat
bug