In the the present work, we discussed in detail the X-ray shielding behavior of the glasses in the composition of TeO₂-Li₂O-GeO₂-ZnO-Bi₂O₃ for the energy range of 30.82–303 keV. Some essential radiation shielding parameters have effectively been evaluated via EPICS2017 library. EPICS2017 showed a relative change between 0.67%—8.23% from the Phy-X software mass attenuation coefficient (MAC) calculations. According to the findings, one can report that the linear attenuation coefficient (LAC) was enhanced for all photon energies owing to the insertion of 15 mol% Bi₂O₃. From these results, the authors evaluated the thickness variations by finding the half-value layer (HVL), and it was seen that BiTe1 was equal to 0.323 cm while BiTe2 to BiTe4 were equal to 0.221, 0.172, and 0.144 cm in the respective order, at 0.1606 MeV. Similarly, the tenth-value layer (TVL), mean free path (MFP), and effective atomic number (Z_eff) were improved by far the best via sample-BiTe4 (highest Bi₂O₃ concentration).

在目前的工作中，我们详细讨论了能量范围为 30.82-303 keV的 TeO ₂ -Li ₂ O-GeO ₂ -ZnO-Bi ₂ O ₃组成的玻璃的 X 射线屏蔽行为。一些基本的辐射屏蔽参数已通过 EPICS2017 库进行了有效评估。根据 Phy-X 软件质量衰减系数 (MAC) 计算，EPICS2017 显示了 0.67% 至 8.23% 之间的相对变化。根据研究结果，可以报告由于插入了 15 mol% Bi ₂ O ₃，所有光子能量的线性衰减系数 (LAC) 都得到了增强。. 从这些结果中，作者通过寻找半值层 (HVL) 来评估厚度变化，可以看出 BiTe1 等于 0.323 cm，而 BiTe2 到 BiTe4 分别等于 0.221、0.172 和 0.144 cm。 , 在 0.1606 MeV。同样，通过样品-BiTe4（最高Bi ₂ O ₃浓度），第十值层（TVL）、平均自由程（MFP）和有效原子序数（Z _eff）得到了最好的改善。