Two polymerized χ-Anderson type Polyoxometalates based hybrids [N(C₄H₉)₄]₃[C(CH₂O)₃Zn Mo₆O₁₈C(CH₂O)₃CH₂OCH₂] and [N(C₄H₉)₄]₃[C(CH₂O)₃ZnMo₆O₁₈C(CH₂O)₃(CH₂OCH₂)₂C (CH₂OH)₂] named as (TBA)₃[CA-Di@POM] and (TBA)₃[CA-Tri@POM ], respectively have been prepared and different techniques such as FTIR, NMR(¹H, ¹³C) and mass spectrometry were used to characterize these hybrids. Moreover, their photovoltaic performance in solar cell have been explored through current–voltage (I-V) curve. Different photochemical parameters such as short circuit current (I_SC), open circuit voltage (V_OC), fill factor (FF) and efficiency (η) were measured from I to V curve and compared with literature. It is indicated from these results that there is notable enhancement in the efficiency of (TBA)₃[CA-Di@POM] and (TBA)₃[CA-Tri@POM] films in solar cell which were calculated as 0.58% and 1.25% respectively.

两种聚合的基于 χ-Anderson 型多金属氧酸盐的杂化物 [N(C ₄ H ₉ ) ₄ ] ₃ [C(CH ₂ O) ₃ Zn Mo ₆ O ₁₈ C(CH ₂ O) ₃ CH ₂ OCH ₂ ] 和 [N(C) ₄ H ₉ ) ₄ ] ₃ [C(CH ₂ O) ₃ ZnMo ₆ O ₁₈ C(CH ₂ O) ₃ (CH ₂ OCH ₂ ) ₂ C (CH ₂ OH)₂ ] 分别命名为 (TBA) ₃ [CA-Di@POM] 和 (TBA) ₃ [CA-Tri@POM ]，分别制备了 FTIR、NMR( ¹ H, ¹³ C) 和质谱等不同技术被用来表征这些杂种。此外，通过电流-电压（IV）曲线探索了它们在太阳能电池中的光伏性能。从 I 到 V 曲线测量不同的光化学参数，如短路电流 (I _SC )、开路电压 (V _OC )、填充因子 (FF) 和效率 (η) 并与文献进行比较。这些结果表明(TBA) ₃ [CA-Di@POM] 和(TBA) ₃的效率显着提高太阳能电池中的 [CA-Tri@POM] 薄膜分别计算为 0.58% 和 1.25%。