当前位置: X-MOL 学术Philos. Mag. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Flow serrations of rejuvenation behaviour through cryogenic thermal cycling for Zr-based bulk metallic glass
Philosophical Magazine ( IF 1.5 ) Pub Date : 2021-08-22 , DOI: 10.1080/14786435.2021.1964704
Y. S. Luo 1 , Z. Wang 1 , J. W. Qiao 1, 2
Affiliation  

ABSTRACT

Effects of cryogenic thermal cycling (CTC) on mechanical properties and serrated flow of the Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass were studied. The improved plasticity, a slightly reduced yield stress and abundant small serrations could be signs of rejuvenation. The high disorder degree result from rejuvenation increases the volume of shear transformation zones (STZs), and thus leads to the enhancement of plasticity. The larger plasticity of BMGs is realised through the superimposed effect of two favourable factors (CTC treatment and strain rate). In this case, the experimental failure threshold is far below the theoretical value. It provides a new idea for designing ductile BMGs.



中文翻译:

Zr基块状金属玻璃通过低温热循环再生行为的流动锯齿

摘要

研究了低温热循环 (CTC) 对 Zr 52.5 Cu 17.9 Ni 14.6 Al 10 Ti 5块状金属玻璃力学性能和锯齿流动的影响。改善的可塑性、略微降低的屈服应力和丰富的小锯齿可能是恢复活力的迹象。再生导致的高无序度增加了剪切转变区(STZ)的体积,从而导致可塑性增强。BMGs 更大的可塑性是通过两个有利因素(CTC 处理和应变速率)的叠加作用实现的。在这种情况下,实验失败阈值远低于理论值。它为设计可延展的 BMG 提供了一种新思路。

更新日期:2021-10-18
down
wechat
bug