当前位置: X-MOL 学术J. Radioanal. Nucl. Chem. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Evaluation of nuclear reaction cross sections data for the production of 65Zn via proton and deuteron induced reactions on natCu
Journal of Radioanalytical and Nuclear Chemistry ( IF 1.5 ) Pub Date : 2021-08-18 , DOI: 10.1007/s10967-021-07941-3
W. Ali 1 , M. Zeeshan 1, 2 , M. Hussain 1 , H. Zaneb 2
Affiliation  

The natCu(p,x)65Zn and natCu(d,x)65Zn reactions used for beam monitoring have been considered to evaluate. All available experimental cross-section data for natCu(p, x)65Zn and natCu(d, x)65Zn reactions have been obtained and compared with the nuclear model calculations using ALICE-IPPE and TALYS-1.9. A comparison of the previously evaluated data for these reactions under the umbrella of the International Atomic Energy Agency (IAEA) is given The thick target yield (TTY) of the 65Zn was calculated from recommended excitation functions obtained by a modified statistical procedure. Analyses of the radio-impurities have been done. Assessment of 65Zn yields and related radionuclide impurities suggest that natCu(p,x)65Zn process over the energy range of 20 → 9 MeV could be a method of choice for the for the higher accuracy of beam monitoring.



中文翻译:

通过质子和氘核在 natCu 上的诱导反应生产 65Zn 的核反应截面数据评估

已考虑评估用于光束监测的nat Cu(p,x) 65 Zn 和nat Cu(d,x) 65 Zn 反应。获得了所有可用的nat Cu(p, x) 65 Zn 和nat Cu(d, x) 65 Zn 反应的实验横截面数据,并与使用 ALICE-IPPE 和 TALYS-1.9 的核模型计算进行了比较。在国际原子能机构 (IAEA) 的保护伞下,这些反应的先前评估数据的比较给出了65的厚靶产率 (TTY)Zn 是根据推荐的激励函数计算的,该函数是通过修改后的统计程序获得的。已经完成了放射性杂质的分析。对65 Zn 产率和相关放射性核素杂质的评估表明,在 20 → 9 MeV 能量范围内的nat Cu(p,x) 65 Zn 工艺可能是实现更高射束监测精度的首选方法。

更新日期:2021-08-19
down
wechat
bug