当前位置: X-MOL 学术Met. Sci. Heat Treat. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Influence of Heat Treatment Conditions on Microstructure and Magnetic Properties of Alloy Fe78Co2Zr8Nb2B9Cu1
Metal Science and Heat Treatment ( IF 0.6 ) Pub Date : 2021-08-10 , DOI: 10.1007/s11041-021-00661-1
Wanqiu Yu 1 , Zhong Hua 1 , Zhiqun Wang 2
Affiliation  

The microstructure and magnetic properties of alloy Fe78Co2Zr8Nb2B9Cu1 obtained by single roll melt spinning are studied after annealing at 550, 600 and 650°C for different times. In the case of annealing below 650°C the amorphous matrix contains only precipitates of phase α-Fe(Co). After the annealing at 550°C the specific saturation magnetization increases with the duration of the annealing; after the annealing at 600 and 650°C for over 30 min it remains the same.



中文翻译:

热处理条件对Fe78Co2Zr8Nb2B9Cu1合金组织和磁性能的影响

研究了单辊熔纺获得的Fe 78 Co 2 Zr 8 Nb 2 B 9 Cu 1合金在550、600和650℃不同时间退火后的显微组织和磁性能。在低于 650°C 退火的情况下,非晶基体仅包含相 α-Fe(Co) 的沉淀物。550℃退火后,比饱和磁化强度随着退火时间的延长而增加;在 600 和 650°C 下退火超过 30 分钟后,它保持不变。

更新日期:2021-08-10
down
wechat
bug