当前位置: X-MOL 学术Sens. Bio-Sens. Res. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
SPR biosensor using SnSe-phosphorene heterostructure
Sensing and Bio-Sensing Research Pub Date : 2021-07-23 , DOI: 10.1016/j.sbsr.2021.100442
K.A. Rikta 1 , M.S. Anower 1 , M. Saifur Rahman 1 , M. Mahabubur Rahman 2
Affiliation  

We numerically debrief a prism based SPR biosensor in this paper exploiting a single layer of Alfa-Tin Selenide (α-SnSe) that is not brought to light till today. This material exhibits incredible features with an analogous formation like graphene and phosphorene, and for this instance, a great contemplation is taken by the researchists utilizing a biomolecular recognition element (BRE) for modeling biosensors. The paper centers around the exploration of the effective advancement of surface plasmon resonance (SPR) biosensors by covering the gold (Au)/ silver (Ag)/ copper (Cu) layer with the α-SnSe monolayer. The proposed sensor consists of the structure of prism-(Au/Ag/Cu)-(α-SnSe)-Phosphorene-sensing medium. A dramatic sensitivity enhancement is reported by the analyses in the entire performance of this raised sensor while inserting an α-SnSe layer in between Au/Ag/Cu and phosphorene. The sensitivity for the proposed biosensors displays a maximal grade of 96.43 deg./RIU, 81.43 deg./RIU, and 74.29 deg./RIU for Au, Ag, and Cu based structures, respectively. It can be observed that the sensitivity of Au flourished biosensor is better than that of Ag or Cu based structures. Our outcomes also reveal that SPR sensors with α-SnSe monolayer can be utilized in demonstrative petitions, and their exalted sensitivity and little intentness of analyte are required. Consequently, the raised biosensor exhibits an in-mint condition ventilator in the direction of sensing petitions.



中文翻译:

使用SnSe-磷烯异质结构的SPR生物传感器

我们在本文中对基于棱镜的 SPR 生物传感器进行了数值汇报,该传感器利用单层 Alfa-锡硒化物 (α-SnSe),直到今天才被曝光。这种材料表现出令人难以置信的特征,具有类似石墨烯和磷烯的类似结构,在这种情况下,研究人员利用生物分子识别元件 (BRE) 对生物传感器进行建模进行了深思熟虑。该论文围绕通过用 α-SnSe 单层覆盖金 (Au)/银 (Ag)/铜 (Cu) 层来探索表面等离子共振 (SPR) 生物传感器的有效推进展开。所提出的传感器由棱镜-(Au/Ag/Cu)-(α-SnSe)-磷烯传感介质的结构组成。通过在 Au/Ag/Cu 和磷烯之间插入 α-SnSe 层时对这种凸起传感器的整个性能进行分析,报告了显着的灵敏度增强。所提出的生物传感器的灵敏度最高等级分别为 96.43 度/RIU、81.43 度/RIU 和 74.29 度/RIU,分别用于基于 Au、Ag 和 Cu 的结构。可以观察到,Au 繁荣生物传感器的灵敏度优于 Ag 或 Cu 基结构的灵敏度。我们的结果还表明,具有 α-SnSe 单层的 SPR 传感器可用于示范申请,并且需要它们的高灵敏度和很少的分析物意图。因此,凸起的生物传感器在感应请求的方向上展示了一个完好状态的呼吸机。所提出的生物传感器的灵敏度分别显示出 96.43 度/RIU、81.43 度/RIU 和 74.29 度/RIU 的金、银和铜基结构的最大等级。可以观察到,Au 繁荣生物传感器的灵敏度优于 Ag 或 Cu 基结构的灵敏度。我们的结果还表明,具有 α-SnSe 单层的 SPR 传感器可用于示范申请,并且需要它们的高灵敏度和很少的分析物意图。因此,凸起的生物传感器在感应请求的方向上展示了一个完好状态的呼吸机。所提出的生物传感器的灵敏度分别显示出 96.43 度/RIU、81.43 度/RIU 和 74.29 度/RIU 的金、银和铜基结构的最大等级。可以观察到,Au 繁荣生物传感器的灵敏度优于 Ag 或 Cu 基结构的灵敏度。我们的结果还表明,具有 α-SnSe 单层的 SPR 传感器可用于示范申请,并且需要它们的高灵敏度和很少的分析物意图。因此,凸起的生物传感器在感应请求的方向上展示了一个完好状态的呼吸机。我们的结果还表明,具有 α-SnSe 单层的 SPR 传感器可用于示范申请,并且需要它们的高灵敏度和很少的分析物意图。因此,凸起的生物传感器在感应请求的方向上展示了一个完好状态的呼吸机。我们的结果还表明,具有 α-SnSe 单层的 SPR 传感器可用于示范申请,并且需要它们的高灵敏度和很少的分析物意图。因此,凸起的生物传感器在感应请求的方向上展示了一个完好状态的呼吸机。

更新日期:2021-07-28
down
wechat
bug