Abstract

An approach to the assembly of wood laths using the press with a new design is considered. The suggested approach decreases the duration of piezo treatment due to separation of the assembly process into two stages, namely, blocking of glued surfaces in a press and with termination of product gluing outside of a press until full polymerization of glue is achieved. A design of a press for implementation of the suggested assembly approach is suggested, and analytical relationships and results of experimental studies are given, which confirm the possibility of lath assembly on the equipment with a reduced travel period.

中文翻译：

---

一种提高木板条组装效率的方法

摘要

考虑使用具有新设计的压力机组装木板条的方法。由于组装过程分为两个阶段，所建议的方法减少了压电处理的持续时间，即在压力机中封闭胶合表面和在压力机外终止产品胶合，直到实现胶水完全聚合。提出了用于实施建议的组装方法的压力机设计，并给出了实验研究的分析关系和结果，这证实了在设备上进行板条组装的可能性，并减少了行程时间。