当前位置: X-MOL 学术J. Chem. Eng. Data › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Measurement of the Thermal Conductivities of Toluene, Cyclohexane, and Diethyl Ether at Pressures up to 15.1 MPa and Their Binary Mixtures at Pressures 0.1 and 10.1 MPa from 291 to 351 K
Journal of Chemical & Engineering Data ( IF 2.0 ) Pub Date : 2021-06-30 , DOI: 10.1021/acs.jced.1c00132
Fei Yu 1, 2 , Liu-Ying Yu 1, 2 , Ke-Jun Wu 1, 3 , Chao-Hong He 1, 2
Affiliation  

In this work, the thermal conductivities of toluene, cyclohexane, and diethyl ether were measured from 291 to 351 K at pressures up to 15.1 MPa. The binary systems of toluene–cyclohexane, toluene–diethyl ether, and cyclohexane–diethyl ether were also measured from 291 to 351 K at pressures 0.1 and 10.1 MPa. The relative expanded uncertainty of the obtained data was estimated to be ±2% with a confidence level of 0.95 (k = 2). The linear thermal conductivity model was used to correlate the pure components as a function of temperature and pressure. The thermal conductivities of binary systems were fitted as a function of temperature and composition. For pure components, the maximum values of absolute percentage deviation (AAD) and maximum absolute percentage deviation (MAD) are 0.45 and 0.87%, respectively. For binary systems, the maximum values of AAD and MAD are 0.56 and 1.79%, respectively.

中文翻译:

甲苯、环己烷和二乙醚在压力高达 15.1 MPa 及其二元混合物在压力 0.1 和 10.1 MPa 下从 291 到 351 K 的热导率的测量

在这项工作中,在高达 15.1 MPa 的压力下测量了甲苯、环己烷和乙醚的热导率从 291 到 351 K。甲苯-环己烷、甲苯-乙醚和环己烷-乙醚的二元系统也在 0.1 和 10.1 MPa 的压力下从 291 到 351 K 测量。所得数据的相对扩展不确定性估计为±2%,置信水平为 0.95 ( k= 2)。线性热导率模型用于将纯组分关联为温度和压力的函数。二元系统的热导率被拟合为温度和成分的函数。对于纯组分,绝对百分比偏差 (AAD) 和最大绝对百分比偏差 (MAD) 的最大值分别为 0.45 和 0.87%。对于二元系统,AAD 和 MAD 的最大值分别为 0.56% 和 1.79%。
更新日期:2021-08-12
down
wechat
bug