Abstract

The application of a filler wire in the traditional process of arc surfacing with a flux cored wire in the environment of protective gases is proposed. A flux cored wire of the electrode wire composition is shown to be used as a filler wire. The optimum surfacing parameters, which ensure stable formation of a deposited coating, are determined. The use of a filler wire is found to redistribute the energy balance, to decrease the melting depth of the base metal, and to increase the surfacing speed.

中文翻译：

---

在耐磨涂层沉积中使用药芯焊丝作为填充焊丝的经验

摘要

提出了填充焊丝在保护气体环境下传统药芯焊丝堆焊工艺中的应用。电极焊丝组合物的药芯焊丝被示出用作填充焊丝。确定了确保沉积涂层稳定形成的最佳表面参数。发现使用填充焊丝可以重新分配能量平衡，降低母材的熔化深度，并提高堆焊速度。