In 1988, reference correlations for the viscosity of a selection of molten inorganic salts were proposed by Janz and have been used extensively. During the last 31 years, many additional measurements have been published. In a very recent paper, new reference correlations for the thermal conductivity of 13 inorganic molten salts were proposed. In this paper, reference correlations for the viscosity of those same salts are proposed. All available experimental data for the viscosity of 13 inorganic molten salts have been critically examined with the intention of establishing improved or new reference viscosity correlations. All experimental data have been categorized into primary and secondary data according to the quality of measurement specified by a series of criteria. Standard reference correlations are proposed for the following molten salts (with estimated uncertainties at the 95% confidence level given in parentheses): LiNO3 (6.7%), NaNO3 (3.0%), KNO3 (3.0%), NaBr (1.6%), KBr (2.0%), RbBr (2.2%), LiCl (3.7%), NaCl (2.4%), KCl (1.6%), RbCl (3.6%), CsCl (1.1%), NaI (1.5%), and RbI (1.5%).In 1988, reference correlations for the viscosity of a selection of molten inorganic salts were proposed by Janz and have been used extensively. During the last 31 years, many additional measurements have been published. In a very recent paper, new reference correlations for the thermal conductivity of 13 inorganic molten salts were proposed. In this paper, reference correlations for the viscosity of those same salts are proposed. All available experimental data for the viscosity of 13 inorganic molten salts have been critically examined with the intention of establishing improved or new reference viscosity correlations. All experimental data have been categorized into primary and secondary data according to the quality of measurement specified by a series of criteria. Standard reference correlations are proposed for the following molten salts (with estimated uncertainties at the 95% confidence level given in parentheses): LiNO3 (6.7%), NaNO3 (3.0%), KNO3 (3.0%), NaBr (1.6%), KBr (2.0%), RbBr (2.2%), LiCl...

中文翻译：

---

13 种无机熔盐粘度的参考相关性

1988 年，Janz 提出了一些熔融无机盐粘度的参考相关性，并已被广泛使用。在过去的 31 年中，发表了许多其他测量结果。在最近的一篇论文中，提出了 13 种无机熔盐热导率的新参考相关性。在本文中，提出了这些相同盐的粘度的参考相关性。13 种无机熔盐的粘度的所有可用实验数据都经过严格检查，目的是建立改进的或新的参考粘度相关性。根据一系列标准规定的测量质量，将所有实验数据分为初级数据和次级数据。为以下熔盐提出了标准参考相关性（括号中给出了 95% 置信水平的估计不确定性）：LiNO3 (6.7%)、NaNO3 (3.0%)、KNO3 (3.0%)、NaBr (1.6%)、KBr (2.0%)、RbBr (2.2%)、LiCl (3.7%)、NaCl (2.4%)、KCl (1.6%)、RbCl (3.6%)、CsCl (1.1%)、NaI (1.5%) 和 RbI ( 1.5%）。1988 年，Janz 提出了一些熔融无机盐粘度的参考相关式，并得到了广泛应用。在过去的 31 年中，发表了许多其他测量结果。在最近的一篇论文中，提出了 13 种无机熔盐热导率的新参考相关性。在本文中，提出了这些相同盐的粘度的参考相关性。13 种无机熔盐的粘度的所有可用实验数据都经过严格检查，目的是建立改进的或新的参考粘度相关性。根据一系列标准规定的测量质量，将所有实验数据分为初级数据和次级数据。为以下熔盐提出了标准参考相关性（括号中给出了 95% 置信水平的估计不确定性）：LiNO3 (6.7%)、NaNO3 (3.0%)、KNO3 (3.0%)、NaBr (1.6%)、KBr (2.0%), RbBr (2.2%), LiCl...