当前位置: X-MOL 学术IEEE Trans. Microw. Theory Tech. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
A Novel Configurable Microwave Passive Component Based on Programmable Bridged-T Coil Array
IEEE Transactions on Microwave Theory and Techniques ( IF 4.1 ) Pub Date : 2021-05-04 , DOI: 10.1109/tmtt.2021.3074593
Yo-Shen Lin , Pei-Shan Lu , Yu-Cheng Wu

In this article, a novel configurable microwave passive component is presented, which can be programmed into multiple functions according to the design requirement. The proposed configurable microwave passive component is realized with a 2-D bridged-T coil array, which can be programmed through different wire-bonding configurations to achieve the desired functions. As a design example, a compact configurable microwave passive component implemented using the integrated passive device process is demonstrated. It can be configured into seven different functions, including filters, directional couplers, and power dividers with center frequencies of 2 or 4 GHz, while the circuit size is only 8.7 mm $\times8.1$ mm. The possible extension of the proposed configurable microwave passive component to a reconfigurable one using advanced RF switch technologies is also discussed.

中文翻译:


基于可编程桥接T线圈阵列的新型可配置微波无源器件



本文提出了一种新型可配置微波无源器件,可以根据设计要求将其编程为多种功能。所提出的可配置微波无源元件是通过二维桥式T线圈阵列实现的,可以通过不同的引线键合配置进行编程以实现所需的功能。作为设计示例,演示了使用集成无源器件工艺实现的紧凑型可配置微波无源器件。它可以配置成七种不同的功能,包括中心频率为2或4GHz的滤波器、定向耦合器和功率分配器,而电路尺寸仅为8.7mm$\times8.1$mm。还讨论了所提出的可配置微波无源组件到使用先进射频开关技术的可重构组件的可能扩展。
更新日期:2021-05-04
down
wechat
bug