当前位置:
X-MOL 学术
›
IEEE Trans. Dielect Elect. Insul.
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Effect of Oxygen on Power Frequency Breakdown Characteristics and Decomposition Properties of C5-PFK/CO2 Gas Mixture
IEEE Transactions on Dielectrics and Electrical Insulation ( IF 2.9 ) Pub Date : 2021-04-16 , DOI: 10.1109/tdei.2020.009092 Yalong Li 1 , Xiaoxing Zhang 1 , Yi Li 1 , Zhuo Wei 1 , Fanchao Ye 1 , Song Xiao 1 , Xiaoxing Zhang 2 , Yi Wang 2
IEEE Transactions on Dielectrics and Electrical Insulation ( IF 2.9 ) Pub Date : 2021-04-16 , DOI: 10.1109/tdei.2020.009092 Yalong Li 1 , Xiaoxing Zhang 1 , Yi Li 1 , Zhuo Wei 1 , Fanchao Ye 1 , Song Xiao 1 , Xiaoxing Zhang 2 , Yi Wang 2
Affiliation
This study explores the effect of O
2 as the second-component buffer gas on the power frequency breakdown characteristics and decomposition products of C5-PFK/CO
2 gas mixture. It is found that the breakdown voltage of C5-PFK/CO
2 gas mixture containing 7.5% C5-PFK is about 1.4 times that of CO
2 gas and about 2/3 of SF
6 gas at the same pressure. Although the average breakdown voltage of C5-PFK/CO
2
/O
2 gas mixture is slightly lowered, the addition of O
2 reduces the standard deviation of the breakdown voltage, improving the insulation stability of the C5-PFK/CO
2 gas mixture. The decomposition by products of C5-PFK/CO
2 gas mixture include CO, CO
2
, CF
4
, COF
2
, C
2
F
4
, C
2
F
6
, C
3
F
6
, C
3
F
6
0, C
3
F
8/
, C
4
F
10
, CHF
3
, C3HF7 and other fluorocarbon compounds. C5-PFK/CO
2
/O
2 gas mixture with 4% O
2 produces much CF
4
, C
2
F
6 and less CO after breakdown. It is recommended to add 4 to 6% O
2 in C5-PFK/CO
2 gas mixture to improve the power frequency breakdown characteristics for engineering application.
中文翻译:
氧气对C5-PFK/CO2混合气体工频击穿特性及分解性能的影响
本研究探讨了O 2 作为第二组分缓冲气体对C5-PFK/CO 2 气体混合物工频击穿特性和分解产物的影响。结果发现,在相同压力下,含有7.5%C5-PFK的C5-PFK/CO 2 气体混合物的击穿电压约为CO 2 气体的1.4倍,约为SF 6 气体的2/3。虽然C5-PFK/CO 2 /O 2 气体混合物的平均击穿电压略有降低,但O 2 的添加降低了击穿电压的标准偏差,提高了C5-PFK/CO 2 气体混合物的绝缘稳定性。 C5-PFK/CO 2 气体混合物的分解副产物包括CO、CO 2 、CF 4 、COF 2 、C 2 F 4 、C 2 F 6 、C 3 F 6 、C 3 F 6 0、C 3 F 8 / 、C 4 F 10 、CHF 3 、C3HF7 等氟碳化合物。 C5-PFK/CO 2 /O 2 气体混合物与4%O 2 分解后产生大量CF 4 、C 2 F 6 和少量CO。建议在C5-PFK/CO 2 混合气体中添加4~6%的O 2 ,以改善工频击穿特性,适合工程应用。
更新日期:2021-04-16
中文翻译:
氧气对C5-PFK/CO2混合气体工频击穿特性及分解性能的影响
本研究探讨了O 2 作为第二组分缓冲气体对C5-PFK/CO 2 气体混合物工频击穿特性和分解产物的影响。结果发现,在相同压力下,含有7.5%C5-PFK的C5-PFK/CO 2 气体混合物的击穿电压约为CO 2 气体的1.4倍,约为SF 6 气体的2/3。虽然C5-PFK/CO 2 /O 2 气体混合物的平均击穿电压略有降低,但O 2 的添加降低了击穿电压的标准偏差,提高了C5-PFK/CO 2 气体混合物的绝缘稳定性。 C5-PFK/CO 2 气体混合物的分解副产物包括CO、CO 2 、CF 4 、COF 2 、C 2 F 4 、C 2 F 6 、C 3 F 6 、C 3 F 6 0、C 3 F 8 / 、C 4 F 10 、CHF 3 、C3HF7 等氟碳化合物。 C5-PFK/CO 2 /O 2 气体混合物与4%O 2 分解后产生大量CF 4 、C 2 F 6 和少量CO。建议在C5-PFK/CO 2 混合气体中添加4~6%的O 2 ,以改善工频击穿特性,适合工程应用。