One of the most important factors affecting the printing quality of printing processes is the surface structure of the printing material. The surface structure of the paper formed by fibres can be modified and smoothed out using coatings that make it more suitable for printing. In this study, three different types of coating pigments were prepared and applied onto an 80 g/m² base paper surface. Styrene butadiene latex and polyvinyl alcohol were used as binders, and three different types of pigments, precipitated calcium carbonate, clay and zeolite, were used as pigments in the prepared coatings. The physical and optical properties of all calendered and non-calendered papers were measured and compared. All the prints were produced with an ink-jet digital printing machine upon the coated and calendered papers for recording the printability parameters. The ΔE₀₀ differences between colours, tone values, colour gamuts and colour gamut volumes were measured from the surfaces of the printed papers. The results showed that the coating type had a better effect on print quality, and that the printability properties of coated papers and even calendered papers were very good.

中文翻译：

---

纸张表面涂层颜料和粘合剂对色域和印刷参数的影响

影响印刷工艺印刷质量的最重要因素之一是承印材料的表面结构。由纤维形成的纸张的表面结构可以使用涂层进行修饰和平滑，使其更适合印刷。在本研究中，制备了三种不同类型的涂料颜料并将其涂在 80 g/m ²原纸表面。苯乙烯丁二烯胶乳和聚乙烯醇用作粘合剂，三种不同类型的颜料，沉淀碳酸钙、粘土和沸石用作制备的涂料中的颜料。测量并比较了所有压光纸和非压光纸的物理和光学性能。所有的印刷品都是用喷墨数字印刷机在涂布和压光纸上产生的，用于记录适印性参数。从印刷纸的表面测量颜色、色调值、色域和色域体积之间的Δ E ₀₀差异。结果表明，涂​​层类型对印刷质量有较好的影响，铜版纸甚至压光纸的印刷适性都非常好。