当前位置: X-MOL 学术Compos. Part B Eng. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Mechanical and thermal properties of PEEK composites by incorporating inorganic particles modified phosphates
Composites Part B: Engineering ( IF 12.7 ) Pub Date : 2021-02-11 , DOI: 10.1016/j.compositesb.2021.108715
Yongan Niu , Shuojin Zheng , Pingan Song , Xin Zhang , Chao Wang

This work aims to improve heat resistance and mechanical properties of PEEK composites by filling the modified phosphates with inorganic particles (Si3N4, AlN, Al2O3 and Cu2O) as reinforcements. The modified phosphate/PEEK composites were successfully prepared by pre-mixing and compression molding. The crystalline structures and compositions of modified phosphates and composites are characterized. Furthermore, the thermal and mechanical properties of composites were evaluated by thermal aging resistance at 350 °C for 24 h. The results show that all the four kinds of phosphate reinforcements can enhance the thermal aging resistance of phosphate/PEEK composites to varied extent. For the modified phosphate by Al2O3, its addition increases the 30% weight loss temperature (T30) by 55 °C. Moreover, the compressive strength exhibits a 105.6% enhancement, reaching 321.4 MPa from 156.3 MPa of the PEEK matrix. This work provides a valuable route to improve the thermal and mechanical properties of PEEK composites, which would have promise applications in heat-resistant and high-strength structural materials.



中文翻译:

通过掺入无机颗粒改性的磷酸盐,PEEK复合材料的机械和热性能

这项工作旨在通过在改性磷酸盐中填充无机颗粒(Si 3 N 4,AlN,Al 2 O 3和Cu 2)来提高PEEK复合材料的耐热性和机械性能。O)作为增援。通过预混合和压缩成型成功地制备了改性的磷酸盐/ PEEK复合材料。表征了改性磷酸盐和复合物的晶体结构和组成。此外,通过在350°C下持续24 h的耐热老化性来评估复合材料的热和机械性能。结果表明,四种磷酸盐增强剂均可在不同程度上增强磷酸盐/ PEEK复合材料的耐热老化性能。对于通过Al 2 O 3改性的磷酸盐,其添加会增加30%的失重温度(T 30)在55°C下。此外,抗压强度显示出105.6%的增强,从PEEK基体的156.3 MPa达到321.4 MPa。这项工作为改善PEEK复合材料的热和机械性能提供了一条有价值的途径,这有望在耐热和高强度结构材料中得到应用。

更新日期:2021-02-21
down
wechat
bug