The Jurassic coal fields in western China are characterized by thick coal seams and weak overburden. The height of an interconnected fracture zone (HIFZ) is often abnormally high for fracture zones produced by coal seam mining. In this paper, HIFZ is discussed through theoretical analysis, in-situ investigation, and data fitting with regression analysis. A comparison of two calculation methods in this study indicates the applicability of calculating HIFZ by the first method, based on the mechanical relationships among fractured rock strata, i.e., (i) the flexural and breaking limit conditions of roof rock mass, (ii) influence of rock fragmentation and bulking, and (iii) thickness of excavated coal seam. In the second method, an analytical formula of HIFZ is obtained by a fitting regression analysis on the measured data of coal mines under similar geo-mining conditions. For the HIFZ in working face 103 of the Zhuanlongwan coal mine, the two calculation methods yield values of 109.74 m and 92.91 ∼ 114.57 m, respectively. The measured value is 107.67 m, obtained using the method of drilling double-end sealing and water leakage measurement. The results of both theoretical calculations are mostly consistent with the measured value, which verifies the effectiveness of the two prediction methods.