当前位置: X-MOL 学术JOM › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Low-Temperature Molten Salt Synthesis and Characterization of Nanowire-Like TaB 2 Powder
JOM ( IF 2.1 ) Pub Date : 2021-01-04 , DOI: 10.1007/s11837-020-04509-6
Liaqat Ali Shah

TaB2 nanopowder has been prepared by the molten salt synthesis (MSS) technique. Nanowire-like TaB2 nanopowder was successfully synthesized by reacting in the Ta2O5–MgB2 system using KCl/NaCl as reaction media. The impact of the firing temperature (800°C to 1000°C), firing time (1 h to 4 h), and ratio of reactants to salt (1:0, 1:2, 1:5, and 1:10) on the preparation of the TaB2 nanopowder was examined. The resultant powder samples were characterized by scanning electron microscopy (SEM), x-ray diffraction (XRD) analysis, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and surface area analysis (SAA). The results showed that the reaction involved in the formation of crystalline TaB2 nanopowder could be completed successfully at 1000°C after 4 h of firing when the mass ratio of reactants to salt was 1:5. The resulting TaB2 nanopowders exhibited nanowire-like morphology.



中文翻译:

纳米线状TaB 2粉末的低温熔融盐合成与表征

TaB 2纳米粉已通过熔融盐合成(MSS)技术制备。以KCl / NaCl为反应介质,在Ta 2 O 5 -MgB 2体系中反应,成功合成了纳米线状TaB 2纳米粉。焙烧温度(800°C至1000°C),焙烧时间(1h至4h)以及反应物与盐的比例(1:0、1:2、1:5和1:10)的影响TaB 2的制备检查了纳米粉。通过扫描电子显微镜(SEM),X射线衍射(XRD)分析,透射电子显微镜(TEM),高分辨率透射电子显微镜(HRTEM)和表面积分析(SAA)对所得粉末样品进行表征。结果表明,当反应物与盐的质量比为1:5时,焙烧4 h后,在1000℃下成功地完成了形成结晶TaB 2纳米粉体的反应。所得的TaB 2纳米粉体表现出纳米线状形态。

更新日期:2021-01-05
down
wechat
bug