Optimization and Preparation of a Gel Polymer Electrolyte Membrane for Supercapacitors,Chemical Engineering & Technology

当前位置： X-MOL 学术 › Chem. Eng. Technol. › 论文详情

Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)

Optimization and Preparation of a Gel Polymer Electrolyte Membrane for Supercapacitors
Chemical Engineering & Technology ( IF 1.8 ) Pub Date : 2020-12-29 , DOI: 10.1002/ceat.202000508
Wei Yang ₁ , Linlin Li ₁ , Biao Zhang ₁ , Qianyun Yang ₂ , Hanbo Zou ₁ , Wenzhi Zheng ₃ , Shengzhou Chen ₁

Affiliation

Supercapacitors have great potential in the hybrid fuel automobile market because of their high power density and fast charge and discharge, in which the working electrolyte of supercapacitors is the key to determine their performance. Optimization and preparations of poly(vinylidene difluoride)‐hexafluoropropylene/poly(methyl methacrylate) (PVDF‐HFP/PMMA) gel polymer electrolyte membranes for supercapacitors based on Design Expert 8.0 software are described. The range of conditions is determined by monofactor analysis. The optimal preparation conditions are obtained by response surface simulation optimization.

中文翻译：

超级电容器用凝胶聚合物电解质膜的优化与制备

超级电容器具有高功率密度和快速充电和放电的特性，因此在混合燃料汽车市场上具有巨大潜力，其中超级电容器的工作电解质是决定其性能的关键。描述了基于Design Expert 8.0软件的超级电容器用聚偏二氟乙烯-六氟丙烯/聚甲基丙烯酸甲酯（PVDF-HFP / PMMA）凝胶聚合物电解质膜的优化和制备。条件范围通过单因素分析确定。通过响应面仿真优化获得了最佳的制备条件。

更新日期：2021-02-19

点击分享查看原文

点击收藏

阅读更多本刊最新论文本刊介绍/投稿指南11