当前位置:
X-MOL 学术
›
Nucl. Instrum. Methods Phys. Res. Sect. A Accel. Spectrom. Detect. Assoc. Equip.
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Design of Pt/C X-ray supermirror by needle optimization
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment ( IF 1.5 ) Pub Date : 2020-12-26 , DOI: 10.1016/j.nima.2020.164988 Xiaodong Wang , Hai Tian , Shuai Ren , Peng Zhou , Bo Chen
中文翻译:
通过针头优化设计Pt / C X射线超级镜
更新日期:2020-12-26
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment ( IF 1.5 ) Pub Date : 2020-12-26 , DOI: 10.1016/j.nima.2020.164988 Xiaodong Wang , Hai Tian , Shuai Ren , Peng Zhou , Bo Chen
Needle optimization is widely used in visible and infrared region, but it is rarely utilized in X-ray and extreme ultraviolet waveband. We use Needle optimization to design Pt/C X-ray supermirrors, and the grazing incidence angles are 1.0, 1.4, and 1.7 degree, respectively. A modified target is introduced into optilayer software. A good result is obtained by Optilayer software combined with IMD software. The difference of design results between block method and needle optimization is discussed.
中文翻译:
通过针头优化设计Pt / C X射线超级镜
针头优化广泛用于可见光和红外区域,但很少用于X射线和极紫外波段。我们使用Needle优化来设计Pt / C X射线超级镜,掠入射角分别为1.0、1.4和1.7度。将修改后的目标引入optilayer软件。Optilayer软件与IMD软件结合使用可获得良好的效果。讨论了分块法与针头优化设计结果的差异。