当前位置: X-MOL 学术Appl. Radiat. Isot. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Gamma spectrometry of iodine-125 produced in IEA-R1 nuclear reactor, using HPGe detector and fixation into epoxy matrix disc
Applied Radiation and Isotopes ( IF 1.6 ) Pub Date : 2020-12-19 , DOI: 10.1016/j.apradiso.2020.109568
Osvaldo L. da Costa , Daiane C.B. de Souza , Fabio G. Castanho , Anselmo Feher , João A. Moura , Carla D. Souza , Henrique B. Oliveira , Marcelo F. Máduar , Carlos A. Zeituni , Maria Elisa C.M. Rostelato

Few places in the world produce iodine-125. In Brazil, the first production was achieved by using the IEA-R1 nuclear reactor located at Nuclear and Energy Research Institute – IPEN. To verify the quality of iodine-125 produced, and the amount of contaminants such as iodine-126, cesium-134 and caesium-137 among others, iodine-125 samples were immobilized into epoxy matrix disc, with the same geometry of a barium-133 reference radioactive source, used to calibrate an HPGe detector. The HPGe detector has a thin carbon composite window, which allows measure the iodine-125 photopeaks, between 27.1 and 35.4 keV. The method employed here was successful in producing and measurement of iodine-125.



中文翻译:

使用HPGe检测器并固定在环氧基质盘中的IEA-R1核反应堆中产生的碘125的伽马能谱

世界上很少有地方生产碘125。在巴西,第一批生产是通过使用位于IPEN核能研究所的IEA-R1核反应堆实现的。为了验证生产的碘125的质量以及诸如碘126,铯134和铯137等污染物的数量,将碘125样品固定在环氧钡基盘中,其几何形状与钡相同。 133参考放射性源,用于校准HPGe检测器。HPGe检测器具有薄的碳复合窗口,可测量27.1至35.4 keV之间的碘125光电峰。这里使用的方法成功地生产和测量了碘125。

更新日期:2020-12-30
down
wechat
bug