当前位置: X-MOL 学术Propellants Explos. Pyrotech. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Research on Regenerating Activated Carbon in 2,4,6‐Trinitrotoluene (TNT) Explosives Manufacturing Industry by Microwave Radiation and Ionized Nitrogen
Propellants, Explosives, Pyrotechnics ( IF 1.7 ) Pub Date : 2020-12-16 , DOI: 10.1002/prep.202000166
Bui Dinh Nhi 1
Affiliation  

Currently, 2,4,6‐trinitrotoluene (TNT) explosive plants often apply activated carbon to treat aromatic nitrogen compounds in wastewater, so finding optimal measures to regenerate activated carbon is essential. The method of using microwave radiation in combination with the ionized current of nitrogen was studied. The results showed that the application of the above method helped the regeneration efficiency of activated carbon reach 95.26 % after 60 minutes of treatment. The optimum conditions were given with an microwave power of 500 W, a nitrogen pressure of 0.015 MPa. The above method has a high environmental significance when the effluent after regeneration has a chemical oxygen demand (COD) of 130 mg/l, allowing it to be discharged into the environment. The method also makes economic sense when activated carbon can be regenerated many times.

中文翻译:

微波辐射和电离氮在2,4,6-三硝基甲苯(TNT)炸药制造业中再生活性炭的研究

当前,2,4,6-三硝基甲苯(TNT)炸药厂经常使用活性炭来处理废水中的芳香族氮化合物,因此寻找再生活性炭的最佳措施至关重要。研究了微波辐射结合氮离子流的方法。结果表明,采用上述方法处理60分钟后,活性炭的再生效率达到95.26%。最佳条件是微波功率为500 W,氮气压力为0.015 MPa。当再生后的废水的化学需氧量(COD)为130 mg / l时,上述方法具有很高的环境意义,可将其排放到环境中。当活性炭可以多次再生时,该方法也具有经济意义。
更新日期:2021-01-11
down
wechat
bug