当前位置: X-MOL 学术Forests › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Potential of Briquette Produced with Torrefied Agroforestry Biomass to Generate Energy
Forests ( IF 2.4 ) Pub Date : 2020-11-28 , DOI: 10.3390/f11121272
Gabriel Reis Portilho , Vinicius Resende de Castro , Angélica de Cássia Oliveira Carneiro , José Cola Zanuncio , Antonio José Vinha Zanuncio , Paula Gabriella Surdi , Jorge Gominho , Solange de Oliveira Araújo

Agroforestry industries, such as sugar-alcohol, food, and logging, produce large quantities of waste, used to generate energy from direct burning. The application of other processes, such as torrefaction and briquetting, can increase the profits from the use of agro-industrial waste for energy generation. Briquetting is an alternative for using these wastes, allowing the compaction of the biomass, generating a biofuel with high energy density, and which is more homogeneous and easier to store and transport. The objective of this study was to evaluate the physical and chemical properties of four biomass types (wastes from sawed eucalypt and pine wood, coffee pruning wastes, and sugarcane bagasse) torrefied at 300 °C and compacted (briquetting) at pressures of 6.21, 8.27, and 10.34 MPa. The torrefaction increased the fixed carbon content, ash, and calorific value, and reduced the volatile material content and hygroscopic equilibrium moisture of the biomasses. The volatile material content was lower and the fixed carbon higher in the coffee pruning waste, the ash content higher in the sugarcane bagasse, and the calorific value higher in the pine and eucalypt wood. The briquetting and the torrefaction processes increased the biomass bulk density, and the useful calorific value, respectively, and consequently the energy density of the briquettes produced with torrefied raw material under high pressure. The mechanical properties of the briquettes produced with all materials increased with the compaction pressure. Torrefaction and briquetting increased the energy potential of the biomasses evaluated to produce energy from clean technology.

中文翻译:

用改良的农林生物质生产的煤饼具有产生能源的潜力

农林业产业,例如糖醇,食品和伐木业,会产生大量废物,用于直接燃烧产生能量。应用其他工艺(例如烘焙和压块)可以增加使用农业工业废料发电的收益。压块法是使用这些废物的替代方法,可以压实生物质,产生具有高能量密度的生物燃料,并且更均匀,更易于存储和运输。这项研究的目的是评估在300°C焙干并在6.21、8.27的压力下压实(成块)的四种生物质类型(来自桉木和松木的废料,咖啡修剪废料和甘蔗渣的废料)的物理和化学性质。和10.34 MPa。烘焙提高了固定碳含量,灰分,和发热量,并降低了生物质的挥发性物质含量和吸湿平衡水分。咖啡修剪废料中的挥发性物质含量较低,固定碳较高,甘蔗渣中的灰分较高,松木和桉木中的热值较高。压块和焙烧过程分别增加了生物质的堆积密度和有用的热值,因此提高了用焙烧的原料在高压下生产的团块的能量密度。用所有材料制成的团块的机械性能都随压实压力而增加。烘焙和压块增加了经评估可从清洁技术生产能源的生物质的能源潜力。降低了生物质的挥发性物质含量和吸湿平衡水分。咖啡修剪废料中的挥发性物质含量较低,固定碳较高,甘蔗渣中的灰分较高,而松木和桉木中的热值较高。压块和焙烧过程分别增加了生物质的堆积密度和有用的热值,因此提高了用焙烧的原料在高压下生产的团块的能量密度。用所有材料制成的团块的机械性能均随压实压力而增加。烘焙和压块增加了经评估可从清洁技术生产能源的生物质的能源潜力。降低了生物质的挥发性物质含量和吸湿平衡水分。咖啡修剪废料中的挥发性物质含量较低,固定碳较高,甘蔗渣中的灰分较高,而松木和桉木中的热值较高。压块和焙烧过程分别增加了生物质的堆积密度和有用的热值,因此提高了用焙烧的原料在高压下生产的团块的能量密度。用所有材料制成的团块的机械性能都随压实压力而增加。烘焙和压块增加了经评估可从清洁技术生产能源的生物质的能源潜力。咖啡修剪废料中的挥发性物质含量较低,固定碳较高,甘蔗渣中的灰分较高,而松木和桉木中的热值较高。压块和焙烧过程分别增加了生物质的堆积密度和有用的热值,因此提高了用焙烧的原料在高压下生产的团块的能量密度。用所有材料制成的团块的机械性能都随压实压力而增加。烘焙和压块增加了经评估可从清洁技术生产能源的生物质的能源潜力。咖啡修剪废料中的挥发性物质含量较低,固定碳较高,甘蔗渣中的灰分较高,而松木和桉木中的热值较高。压块和焙烧过程分别增加了生物质的堆积密度和有用的热值,因此提高了用焙烧的原料在高压下生产的压块的能量密度。用所有材料制成的团块的机械性能均随压实压力而增加。烘焙和压块增加了经评估可从清洁技术生产能源的生物质的能源潜力。松木和桉木的发热量更高。压块和焙烧过程分别增加了生物质的堆积密度和有用的热值,因此提高了用焙烧的原料在高压下生产的团块的能量密度。用所有材料制成的团块的机械性能都随压实压力而增加。烘焙和压块增加了经评估可从清洁技术生产能源的生物质的能源潜力。松木和桉木的发热量更高。压块和焙烧过程分别增加了生物质的堆积密度和有用的热值,因此提高了用焙烧的原料在高压下生产的团块的能量密度。用所有材料制成的团块的机械性能都随压实压力而增加。烘焙和压块增加了经评估可从清洁技术生产能源的生物质的能源潜力。用所有材料制成的团块的机械性能均随压实压力而增加。烘焙和压块增加了经评估可从清洁技术生产能源的生物质的能源潜力。用所有材料制成的团块的机械性能都随压实压力而增加。烘焙和压块增加了经评估可从清洁技术生产能源的生物质的能源潜力。
更新日期:2020-12-01
down
wechat
bug