当前位置: X-MOL 学术IEEE J. Solid-State Circuits › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
A Fully Integrated 27-dBm Dual-Band All-Digital Polar Transmitter Supporting 160 MHz for Wi-Fi 6 Applications
IEEE Journal of Solid-State Circuits ( IF 4.6 ) Pub Date : 2020-12-01 , DOI: 10.1109/jssc.2020.3024973
Assaf Ben-Bassat , Shahar Gross , Aaron Lane , Anna Nazimov , Bassam Khamaisi , Elad Solomon , Elan Banin , Eli Borokhovich , Nahum Kimiagorov , Nati Dinur , Phillip Skliar , Roi Cohen , Rotem Banin , Sarit Zur , Sebastian Reinhold , Smadar Breuer-Bruker , Tomer Abuhazira , Tom Livneh , Tzvi Maimon , Uri Parker , Ashoke Ravi , Ofir Degani

This work presents a dual-band polar digital transmitter (P-DTX) based on a digitally controlled two-point edge interpolation digital-to-time converter, which is capable of supporting Wi-Fi 6 applications. The proposed P-DTX is fabricated in a standard 28-nm CMOS process. The 2.5/5GHz digital power amplifiers (DPAs) reach a maximum power ( $P_{\mathrm {MAX}}$ )/power efficiency (PE) of 27 dBm/53% and 27dBm/37%, respectively. The transmitter meets an error vector magnitude (EVM)/DPA PE/total TX power dissipation of −30.5 dB/33%/532 mW for the low band and −29 dB/26%/718 mW for the high band at 6-dB backoff (dBBO) from $P_{MAX}$ . An EVM as low as −40 dB is achieved using digital pre-distortion at 7–8 dBBO, for 20–160-MHz signal bandwidths, thus demonstrating MCS11 1024-QAM OFDM Wi-Fi 6 operation.

中文翻译:

完全集成的 27dBm 双频段全数字极化发射器,支持 160MHz,适用于 Wi-Fi 6 应用

这项工作提出了一种基于数控两点边缘插值数字时间转换器的双频极性数字发射机 (P-DTX),能够支持 Wi-Fi 6 应用。建议的 P-DTX 采用标准 28-nm CMOS 工艺制造。2.5/5GHz 数字功率放大器 (DPA) 达到最大功率 ( $P_{\mathrm {MAX}}$ )/功率效率 (PE) 分别为 27 dBm/53% 和 27dBm/37%。发射器在低频段满足 -30.5 dB/33%/532 mW 和高频段 -29 dB/26%/718 mW(6-dB)的误差矢量幅度 (EVM)/DPA PE/总 TX 功耗回退 (dBBO) 从 $P_{MAX}$ . 对于 20–160 MHz 信号带宽,使用 7–8 dBBO 的数字预失真实现了低至 -40 dB 的 EVM,从而展示了 MCS11 1024-QAM OFDM Wi-Fi 6 操作。
更新日期:2020-12-01
down
wechat
bug