Abstract In ball-milled iron particles for soft magnetic composites (SMCs), milling aids with lubricity can induce a (001) fiber texture with superior magnetic properties. Effects of lubricants on the recrystallization behavior of ball-milled iron particles with fiber texture and their magnetic properties of SMCs using the iron particles were investigated. During ball milling, lubricant oil and boron nitride (a solid lubrication particle) were used as lubricants. Both as-milled iron particles have a (001) fiber texture. However, when these iron particles are recrystallized using heat treatment, the iron particles milled using the lubricant oil almost disappeared while the fiber texture in the particles milled using the boron nitride was strongly retained. Therefore, it is concluded that ball milling for iron particles using boron nitride lubricant can retain (001) fiber texture in heat-treated iron particles, and SMC using these iron particles have higher permeability and lower coercive force.

中文翻译：

---

润滑剂助磨剂对软磁复合材料(001)纤维织构球磨铁粉再结晶行为和磁性能的影响

摘要 在用于软磁复合材料 (SMC) 的球磨铁颗粒中，具有润滑性的助磨剂可以诱导具有优异磁性能的 (001) 纤维织构。研究了润滑剂对具有纤维织构的球磨铁颗粒再结晶行为的影响以及它们对使用铁颗粒的 SMC 磁性能的影响。在球磨过程中，润滑油和氮化硼（一种固体润滑颗粒）被用作润滑剂。两种研磨后的铁颗粒都具有 (001) 纤维质地。然而，当这些铁颗粒使用热处理再结晶时，使用润滑油研磨的铁颗粒几乎消失，而使用氮化硼研磨的颗粒中的纤维组织被强烈保留。所以，