当前位置：
X-MOL 学术
›
Met. Sci. Heat Treat.
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Formation of Coatings Based on Titanium Cuprides by Explosive Welding with Subsequent Laser Treatment
Metal Science and Heat Treatment ( IF 0.6 ) Pub Date : 2020-09-01 , DOI: 10.1007/s11041-020-00572-7 V. G. Shmorgun , O. V. Slautin , A. G. Serov , V. O. Kharlamov , A. S. Kaigorodov
Metal Science and Heat Treatment ( IF 0.6 ) Pub Date : 2020-09-01 , DOI: 10.1007/s11041-020-00572-7 V. G. Shmorgun , O. V. Slautin , A. G. Serov , V. O. Kharlamov , A. S. Kaigorodov
The effect of laser treatment parameters for copper cladding applied by explosive welding and subsequent rolling on a titanium surface on coating structure and phase composition is studied. It is shown that the relative (compared with VT1-0 titanium alloy) wear resistance of a coating with an increase in titanium content from 30 to 50% increases at 20°C from 2.9 to 4.4, and at 400°C from 1.7 up to 2.0.
中文翻译：
通过爆炸焊接和随后的激光处理形成基于铜化钛的涂层
研究了钛表面爆炸焊接和后续滚压铜覆层的激光处理参数对涂层结构和相组成的影响。结果表明，随着钛含量从 30% 增加到 50%，涂层的相对（与 VT1-0 钛合金相比）耐磨性在 20°C 下从 2.9 增加到 4.4，在 400°C 下从 1.7 增加到2.0.
更新日期：2020-09-01
中文翻译：
通过爆炸焊接和随后的激光处理形成基于铜化钛的涂层
研究了钛表面爆炸焊接和后续滚压铜覆层的激光处理参数对涂层结构和相组成的影响。结果表明，随着钛含量从 30% 增加到 50%，涂层的相对（与 VT1-0 钛合金相比）耐磨性在 20°C 下从 2.9 增加到 4.4，在 400°C 下从 1.7 增加到2.0.
京公网安备 11010802027423号