当前位置: X-MOL 学术Int. J. Self-Propag. High-Temp. Synth. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Mechanoactivated SHS in the Ti–Ni System: Influence of Preheating Temperature
International Journal of Self-Propagating High-Temperature Synthesis ( IF 0.5 ) Pub Date : 2020-10-02 , DOI: 10.3103/s1061386220030048
N. A. Kochetov , B. S. Seplyarsii

Abstract

Product composition and combustion parameters for non-activated and mechanically activated Ti–Ni mixtures were explored as a function of preheating temperature T0. Upon an increase in T0, frontal combustion of activated blends was found to change to a mode of thermal explosion at T0 around 190°С. Frontal combustion of non-activated blends was accompanied by local melting over the entire range of T0. Our results may turn helpful in theoretical modeling of SHS reactions.



中文翻译:

Ti-Ni系统中的机械活化SHS:预热温度的影响

摘要

研究了未活化和机械活化的Ti-Ni混合物的产物组成和燃烧参数,它们是预热温度T 0的函数。随着T 0的增加,发现活化混合物的正面燃烧在190°C附近的T 0处转变为热爆炸模式。未活化混合物的正面燃烧伴随着在整个T 0范围内的局部熔化。我们的结果可能有助于SHS反应的理论建模。

更新日期:2020-10-02
down
wechat
bug