Corrigendum: “Increased osteoblast functions among nanophase titania/poly(lactide‐co‐glycolide) composites of the highest nanometer surface roughness”

Huinan Liu¹ Elliott B. Slamovich¹ Thomas J. Webster¹

School of Materials Engineering 501 Northwestern Avenue, Purdue University West Lafayette Indiana 47907

[https://doi.org/10.1002/jbm.a.30734]

For the paper Liu et al. J Biomed Mater Res 78(4): 798–807 (2006) – DOI: 10.1002/jbm.a.30734, we inadvertently failed to reference to the republication of a subset of the panels of Figure 1 (labeled PTC25, PTC35, PTC45, and PTC70) and Figure 2 (labeled PTC25, PTC35, and PLGA) which were originally published in Liu et al. Nanotechnology 16 S601–S608 (2005) ‐ DOI: 10.1088/0957‐4,484/16/7/038 as part of Figure 1 (a, b, c, and d, respectively) and Figure 2 (a, PTC25; b, PTC35; e, PLGA, respectively), respectively.

Importantly, this data is our own and the conclusions from the two papers are different.

We apologize for any misconception.

勘误： “纳米表面粗糙度最高的纳米二氧化钛/聚（丙交酯-共-乙交酯）复合材料中成骨细胞功能的增强”

辉南刘¹埃利奥特B. Slamovich ¹托马斯·韦伯斯特¹

普渡大学西北大街501号材料工程学院West Lafayette Indiana 47907

[https://doi.org/10.1002/jbm.a.30734]

对于论文刘等。J Biomed Mater Res 78（4）：798–807（2006）– DOI：10.1002 / jbm.a.30734，我们无意中未提及图1面板的子集的重新发布（标记为PTC25，PTC35，PTC45 ，以及PTC70）和图2（标记为PTC25，PTC35和PLGA），最初在Liu等人的文章中发表。纳米技术16 S601-S608（2005）-DOI：10.1088 / 0957-4,484 / 16/7/038，分别是图1（a，b，c和d）和图2（a，PTC25; b，PTC35）的一部分；分别为e，PLGA）。

重要的是，这些数据是我们自己的，并且两篇论文的结论是不同的。

对于任何误解，我们深表歉意。