This paper presents the tribological examination of various percentages of montmorillonite nanoclay-filled polyester composites and jute fiber reinforced hybrid composites by the Pin on Disc wear testing method. The wear rate and coefficient of friction were investigated for each composition with the working parameters like applied load (10,20,30[Formula: see text]N), sliding speed (3[Formula: see text]m/s), and sliding distance (1500[Formula: see text]m). The reduction in the wear rate was found on the inclusion of 5[Formula: see text]wt.% clay and 25[Formula: see text]wt.% jute fiber and further addition of fiber changes the trend due to the reduced matrix concentration. The wear mechanism of the worn-out surface samples was studied using scanning electron microscopy.

中文翻译：

---

黄麻纤维聚合物复合材料的磨损研究——蒙脱石纳米颗粒的影响

本文介绍了通过 Pin on Disc 磨损测试方法对不同百分比的蒙脱石纳米粘土填充聚酯复合材料和黄麻纤维增强混合复合材料进行摩擦学检查。使用诸如施加载荷（10、20、30[公式：见文本]N）、滑动速度（3[公式：见文本]m/s）和滑动距离（1500[公式：见正文]m）。在加入 5[公式：见文本]wt.% 粘土和 25[公式：见文本]wt.% 黄麻纤维时发现磨损率降低，并且由于基质浓度降低，进一步添加纤维会改变趋势. 使用扫描电子显微镜研究磨损表面样品的磨损机制。