当前位置: X-MOL 学术Surf. Topogr.: Metrol. Prop. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Effect of femtosecond laser power and overlap ratio on surface roughness parameters, contact angle, and tribological properties of the textured SKD 61 tool steel with oil lubrication
Surface Topography: Metrology and Properties ( IF 2.0 ) Pub Date : 2020-09-23 , DOI: 10.1088/2051-672x/ab92ad
Chang-Shuo Chang , Kung-Hsu Hou , Chen-Kuei Chung , Tsung-Wen Tsai , Jen-Fin Lin

This study prepared samples with femtosecond(fs)-laser-induced periodic surface structures (LIPSSs) controlled by laser power (or peak fluence, F 0 ) and overlap ratio (OR) to improve the friction and wear behavior of the SKD 61 tool steel sliding against a hard Si 3 N 4 ceramic counterface in oil lubrications. Pin-on-plate (pin: Si 3 N 4 ; plate: SKD 61 steel) tribological tests were conducted with the reciprocating motion perpendicular to the laser scanning direction and having an incline angle (40°~50°) with respect to the LIPSSs. The contact angles ( θ ) formed on the textured surfaces were measured for an oil lubricant. The ( θ ) oil results were found to have their correlation with the areal surface roughness (S a ), skewness (Sk), and kurtosis (Ku) of the textured surfaces produced at various F 0 and OR values. The mean friction coefficient ( μ ) and wear loss (W) of the steel specim...

中文翻译:

飞秒激光功率和重叠比对带油润滑的织纹SKD 61工具钢的表面粗糙度参数,接触角和摩擦学性能的影响

这项研究制备了具有飞秒(fs)-激光诱导的周期性表面结构(LIPSSs)的样品,该结构受激光功率(或峰值通量F 0)和重叠比(OR)控制,以改善SKD 61工具钢的摩擦磨损性能在油润滑中可与坚硬的Si 3 N 4陶瓷对接面滑动。以垂直于激光扫描方向的往复运动并且相对于LIPSS倾斜角度为(40°〜50°)的方式进行销钉装板(销钉:Si 3 N 4;板块:SKD 61钢)的摩擦学测试。 。测量在油性润滑剂上形成在有纹理的表面上的接触角(θ)。发现(θ)油的结果与在各种F 0和OR值下产生的纹理表面的表面粗糙度(S a),偏度(Sk)和峰度(Ku)有相关性。
更新日期:2020-09-24
down
wechat
bug