当前位置: X-MOL 学术Refract. Ind. Ceram. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Preparation Low-Energy Content Cement from Technogenic Raw Materials
Refractories and Industrial Ceramics ( IF 0.4 ) Pub Date : 2020-09-21 , DOI: 10.1007/s11148-020-00449-5
N. N. Zhanikulov , B. T. Taimasov , I. N. Borisov , M. S. Dauletiyarov , M. Zh. Aitureev , Zh. K. Dzhanmuldaeva

Results of preparing Portland cement by low-energy technology using technogenic raw materials are presented. Coal mining waste and tephritobasalt in a ratio of 1:1 are used as the clay component, and granulated lead slags are used instead of scarce pyrite cinder. Correlation of the influence of charge compositions, saturation coefficient, silicate and alumina moduli, firing regimes with chemical and mineral composition and clinker and cement quality are established. Composition of the raw material mixtures is calculated according to a ROCS program, and the free CaO content in clinker composition is determined. Experimental cement strength is tested after hardening for 7 and 28 days. Its physicomechanical characteristics and structure are studied.



中文翻译:

用技术性原料制备低能耗水泥

介绍了使用技术性原材料通过低能耗技术制备波特兰水泥的结果。比例为1:1的煤矿废渣和四方玄武岩盐用作粘土成分,并使用粒状铅渣代替稀缺的黄铁矿渣。建立了装料组成,饱和系数,硅酸盐和氧化铝模量,烧成方式与化学和矿物组成以及熟料和水泥质量之间的关系。根据ROCS程序计算原料混合物的组成,并确定熟料组成中的游离CaO含量。硬化7天和28天后,测试水泥强度。研究了其物理力学特性和结构。

更新日期:2020-09-21
down
wechat
bug