当前位置: X-MOL 学术Sol. Energy › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Energy and exergy assessment of integrating reflectors on thermal energy storage of evacuated tube solar collector-heat pipe system
Solar Energy ( IF 6.0 ) Pub Date : 2020-10-01 , DOI: 10.1016/j.solener.2020.09.009
Saleh Abo-Elfadl , Hamdy Hassan , M.F. El-Dosoky

Abstract An experimental study is presented on the energy and exergy assessment of integrating reflectors with an evacuated tube solar collector-heat pipe (ETSC-HP) system on its thermal energy storage. The impact of using upper, lower, and upper and lower (two) reflectors on the thermal energy storage, input energy, and energy losses, reflectors' effectiveness, and energy and exergy efficiencies is assessed. A complete thermal model that evaluates the thermal performance of the collector-heat pipe system and selects the reflectors title angles is presented. The findings show that using reflectors with ETSC-HP rises its input energy, storage energy, energy and exergy efficiencies, and reflected and radiation losses but it reduces the convection losses. Using upper, lower and the two reflectors raises the input energy to the collector by about 15.3%, 22.5%, and 37%, respectively, and the output daily storage energy by 14%, 22.1%, and 35.7%, respectively compared with the system without reflectors. The daily thermal efficiency of the ETSC-HP system with upper, lower and the two reflectors is 63.8%, 71.67% and 76.25% compared with 60.57% of the collector without reflectors. Using reflectors with the ETSC-HP raises the system thermal performance curve efficiency by about 16% relative to the collector without reflectors. Moreover, using two reflectors increases the average daily exergy efficiency by about 25.3%. Using reflectors with ETSC-HP proves its ability to raise the energy storage from the collector system compared to previous works.

中文翻译:

集成反射器对真空管太阳能集热器-热管系统热能存储的能量和火用评估

摘要 对集成反射器与真空管太阳能集热管 (ETSC-HP) 系统的热能存储进行能量和火用评估的实验研究。评估了使用上、下、上和下(两个)反射器对热能存储、输入能量和能量损失、反射器有效性以及能量和火用效率的影响。提供了一个完整的热模型,用于评估集热器-热管系统的热性能并选择反射器倾斜角。研究结果表明,使用带有 ETSC-HP 的反射器会提高其输入能量、存储能量、能量和火用效率以及反射和辐射损失,但会降低对流损失。使用鞋面,与无反射器相比,两个反射器分别使集热器的输入能量提高约15.3%、22.5%和37%,输出日储存能量分别提高14%、22.1%和35.7% . 具有上、下和两个反射器的 ETSC-HP 系统的日热效率分别为 63.8%、71.67% 和 76.25%,而没有反射器的集热器为 60.57%。相对于没有反射器的收集器,使用带有 ETSC-HP 的反射器可以将系统热性能曲线效率提高约 16%。此外,使用两个反射器可使日平均火用效率提高约 25.3%。与以前的工作相比,将反射器与 ETSC-HP 一起使用证明了它能够提高收集器系统的能量存储。与没有反射器的系统相比,输出日储存能量分别提高了14%、22.1%和35.7%。具有上、下和两个反射器的 ETSC-HP 系统的日热效率分别为 63.8%、71.67% 和 76.25%,而没有反射器的集热器为 60.57%。相对于没有反射器的收集器,使用带有 ETSC-HP 的反射器可以将系统热性能曲线效率提高约 16%。此外,使用两个反射器可使日平均火用效率提高约 25.3%。与以前的工作相比,将反射器与 ETSC-HP 一起使用证明了它能够提高收集器系统的能量存储。与没有反射器的系统相比,输出日储存能量分别提高了14%、22.1%和35.7%。ETSC-HP系统有上、下和两个反射器的日热效率分别为63.8%、71.67%和76.25%,而没有反射器的集热器为60.57%。相对于没有反射器的收集器,使用带有 ETSC-HP 的反射器可以将系统热性能曲线效率提高约 16%。此外,使用两个反射器可使日平均火用效率提高约 25.3%。与以前的工作相比,将反射器与 ETSC-HP 一起使用证明了它能够提高收集器系统的能量存储。67% 和 76.25% 与没有反射器的集热器的 60.57% 相比。相对于没有反射器的收集器,使用带有 ETSC-HP 的反射器可以将系统热性能曲线效率提高约 16%。此外,使用两个反射器可使日平均火用效率提高约 25.3%。与以前的工作相比,将反射器与 ETSC-HP 一起使用证明了它能够提高收集器系统的能量存储。67% 和 76.25% 与没有反射器的集热器的 60.57% 相比。相对于没有反射器的收集器,使用带有 ETSC-HP 的反射器可以将系统热性能曲线效率提高约 16%。此外,使用两个反射器可使日平均火用效率提高约 25.3%。与以前的工作相比,将反射器与 ETSC-HP 一起使用证明了它能够提高收集器系统的能量存储。
更新日期:2020-10-01
down
wechat
bug