当前位置: X-MOL 学术Eng. Res. Express › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Design, construction, and performance testing of a fixed-bed pyrolysis reactor for production of pyrolytic fuel
Engineering Research Express ( IF 1.5 ) Pub Date : 2020-09-11 , DOI: 10.1088/2631-8695/abb4b1
Taiwo Oluwasesan Oni , Simon Olusegun Ayodeji

In an attempt to produce fuel from plastic waste, a cylindrical fixed-bed pyrolysis reactor with a capacity of 0.01053 m 3 was designed and fabricated. The pyrolytic fuel produced serves as a substitute to fossil fuel. A thermal degradation process, known as fixed-bed pyrolysis, was employed to obtain the pyrolytic fuel from the plastic waste. The operating pressure and the design pressure of the pyrolysis reactor are 25.16 MPa and 28.93 MPa, respectively. The performance testing of the reactor shows that the pyrolytic fuel has higher calorific value, flash point, cetane rating, and density of 39.5 MJ kg −1 , 72.5 °C, 40.5, and 804.0 kg m −3 , respectively. The corresponding values for the fossil fuel (diesel) are 44.8 MJ kg −1 , 68.0 °C, 48.0, and 820.0 kg m −3 , respectively. It was confirmed through the performance testing that the reactor was properly designed and can, therefore, be reliably used to produce pyrolytic fuel, which ...

中文翻译:

用于生产热解燃料的固定床热解反应器的设计,构造和性能测试

为了从废塑料中产生燃料,设计并制造了容量为0.01053 m 3的圆柱形固定床热解反应器。产生的热解燃料可替代化石燃料。采用一种称为固定床热解的热降解工艺从塑料废料中获得热解燃料。热解反应器的操作压力和设计压力分别为25.16 MPa和28.93 MPa。反应器的性能测试表明,热解燃料的发热量高,闪点高,十六烷值高,密度分别为39.5 MJ kg -1,72.5°C,40.5和804.0 kg m -3。化石燃料(柴油)的相应值分别为44.8 MJ kg -1,68.0°C,48.0和820.0 kg m -3。
更新日期:2020-09-12
down
wechat
bug