当前位置: X-MOL 学术Surf. Interfaces › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Synthesis of meso-porous gamma-alumina membrane: effect of yttria addition on the thermal stability
Surfaces and Interfaces ( IF 5.7 ) Pub Date : 2020-12-01 , DOI: 10.1016/j.surfin.2020.100683
Shirin Khanmohammadi , Ehsan Taheri-Nassaj , Morteza Farrokhi-Rad

Abstract In this study supported meso-porous gamma-alumina membrane with a thickness of 2.5µm was synthesized on a macro-porous alpha-alumina substrate via colloidal sol-gel route. To evaluate the improvement in the thermal stability of alumina by yttria addition, unsupported alumina membranes with various amounts of yttria (0, 2.5, 5 and 10%mol) were investigated by XRD and TG-DTA analyses. Based on XRD results and considering transitional alumina stabilization effect, the optimum concentration of yttria was determined to be 5%mol. The results of DTA analysis showed that 5%mol yttria addition shifted the gamma to alpha phase transformation to higher temperatures.

中文翻译:

介孔γ-氧化铝膜的合成:氧化钇添加对热稳定性的影响

摘要 本研究通过胶体溶胶-凝胶途径在大孔α-氧化铝基底上合成了厚度为2.5μm的支撑介孔γ-氧化铝膜。为了评估添加氧化钇对氧化铝热稳定性的改善,通过 XRD 和 TG-DTA 分析研究了具有不同氧化钇量(0、2.5、5 和 10% mol)的无载体氧化铝膜。根据XRD结果并考虑过渡态氧化铝的稳定作用,确定氧化钇的最佳浓度为5%mol。DTA 分析的结果表明,添加 5% mol 氧化钇使 γ 相向 α 相转变转移到更高的温度。
更新日期:2020-12-01
down
wechat
bug