Abstract

An S-band klystron of 50 MW power is being developed at the Budker Institute of Nuclear Physics. At the moment, all the necessary calculations have been made and cathode assembly, bunching cavities, the collector, the solenoid, and the cooling system have been completed. The klystron has been tested in a diode mode without bunching cavities, which were brazed separately. Cavities have been measured and tuned at the required frequencies and installed on the prototype of the klystron. Currently, a fully finished prototype is being tested in order to obtain RF power.

中文翻译：

---

S波段速调管开发

摘要

Budker核物理研究所正在开发一种功率为50 MW的S波段速调管。目前，已经进行了所有必要的计算，并且完成了阴极组件，集束腔，集电器，螺线管和冷却系统。速调管已经在二极管模式下进行了测试，没有聚束腔，这些聚束腔是单独钎焊的。已对腔进行了测量，并以所需的频率进行了调谐，并将其安装在速调管的原型上。目前，正在测试一个完全完成的原型以获得射频功率。