当前位置: X-MOL 学术Fiber Integr. Opt. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Single-Longitude-Mode Fiber Laser Implementation by Using Only Two Subring Cavities in Serial/Parallel Connection
Fiber and Integrated Optics ( IF 2.3 ) Pub Date : 2019-07-09 , DOI: 10.1080/01468030.2019.1637482
Hsin-Che Lee, Yin-Wen Lee, Jiun-Shin Chang, Shien-Kuei Liaw

By incorporating double-ring cavities and a piece of un-pumped Er3+-doped fiber (EDF) as a saturable absorber, we report a single-longitude-mode EDF fiber laser at C-band. The single-longitude-mode is obtained, the first time, by inserting only two subring cavities in either serial connection or parallel connection. The fiber laser has an optical signal-to-noise-ratio of 34.5 dB and a maximum power fluctuation of less than 1.3% for 1-hr operation. It was then modulated up to 10 Gbit/s by using an electro-optic modulator for eye diagrams, compared to back-to-back transmission. Such a compact and low-cost fiber laser is potential for high-speed optical communication.



中文翻译:

通过在串行/并行连接中仅使用两个子环腔来实现单经度模式光纤激光器

通过结合双环腔和一条未泵浦的掺Er 3+的光纤(EDF)作为可饱和吸收体,我们报告了C波段的单经度EDF光纤激光器。通过在串行连接或并行连接中仅插入两个子环腔,首次获得单经度模式。光纤激光器的光信噪比为34.5 dB,1小时工作时最大功率波动小于1.3%。然后,与背对背传输相比,通过使用电光调制器进行眼图调制,可以将其调制速度提高到10 Gbit / s。这种紧凑且低成本的光纤激光器对于高速光通信具有潜力。

更新日期:2019-07-09
down
wechat
bug