当前位置: X-MOL 学术Electromagnetics › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Design of High Selectivity Filtering Power Divider with High Out-of-Band Rejection
Electromagnetics ( IF 0.6 ) Pub Date : 2019-08-23 , DOI: 10.1080/02726343.2019.1658162
Qingchun Cao 1 , Hui Liu 2 , Li Gao 3
Affiliation  

ABSTRACT A novel high-selectivity filtering power divider is presented in this paper. The proposed circuit utilizes two fourth-order filters with a surface mount resistor. The fourth-order filter is realized by quarter-wavelength and half-wavelength resonators. And by controlling the electric and magnetic coupling, two transmission zeros can be realized at the two sides and the passband. Furthermore, the source-load coupling is also adopted. Thus, four transmission zeros are realized, which ensure high selectivity and suppression level for the filtering power divider. To verify the proposed idea, a filtering power divider with operating frequencies of 2.45 GHz is implemented. The design procedures are discussed in detail, and the simulated and measured results are presented.

中文翻译:

高带外抑制高选择性滤波功分器设计

摘要 本文提出了一种新型的高选择性滤波功率分配器。建议的电路使用两个带有表面贴装电阻器的四阶滤波器。四阶滤波器由四分之一波长和半波长谐振器实现。并且通过控制电、磁耦合,可以在两侧和通带实现两个传输零点。此外,还采用了源-负载耦合。这样就实现了四个传输零点,保证了滤波功分器的高选择性和抑制水平。为了验证所提出的想法,实现了工作频率为 2.45 GHz 的滤波功率分配器。详细讨论了设计程序,并给出了模拟和测量结果。
更新日期:2019-08-23
down
wechat
bug