Abstract The performance of OPV module is strongly dominated by the innovating materials and state of the art processes. Herein, we present a large-area and solution-processable OPV module, which the non-fullerene based active layer and interlayers are all deposited by blade coating. The module achieved a power conversion efficiency of 9.5% under 100 mW/cm2 AM1.5G irradiation with an active area of 216 cm2 on a 30 cm by 20 cm substrate. The power output can still maintain about 92.5% of the initial performance after 610 h of light soaking under 10000 lux LED irradiation. To the best of knowledge, it is the record high efficiency by far for OPV module with an active area over a hundred square centimeters.

中文翻译：

---

在 30 cm x 20 cm 基板上制造的大面积有机光伏组件，功率转换效率为 9.5%

摘要 OPV 组件的性能很大程度上取决于创新材料和最先进的工艺。在此，我们提出了一种大面积且可溶液加工的 OPV 模块，其非富勒烯基活性层和夹层均通过刮刀涂层沉积。该模块在 100 mW/cm2 AM1.5G 辐照下实现了 9.5% 的功率转换效率，在 30 cm x 20 cm 基板上的有效面积为 216 cm2。在10000勒克斯LED照射下光浸泡610小时后，功率输出仍能保持初始性能的92.5%左右。据了解，这是迄今为止有效面积超过 100 平方厘米的 OPV 组件创纪录的高效率。