Extended milling/mechanical activation properties of zinc plant residue was investigated using two different milling systems, namely, high speed vibrating ball mill and ring mill, comparatively. The zinc plant residue was mixture of gypsum, anglesite, massicot, quartz, maghemite, and franklinite. Zinc plant residue was milled for 1–30 min in high speed vibrating ball mill and ring mill. The obtained samples were characterized using XRD, SEM, particle size distribution, and N 2 -BET methods. According to results, it was found that the ring mill caused a further decrease in particle size. Particle size distribution and N 2 -BET analyses showed that agglomeration of particles began after 15 min and 5 min milling time for HSBVM and ring mill, respectively.

中文翻译：

---

两种磨机机械活化锌植物渣的性能研究

使用两种不同的研磨系统，即高速振动球磨机和环磨机，比较了锌厂残留物的扩展研磨/机械活化性能。锌植物残渣是石膏、角铁矿、mascot、石英、磁赤铁矿和富兰克林石的混合物。锌厂残留物在高速振动球磨机和环磨机中研磨 1-30 分钟。使用XRD、SEM、粒度分布和N 2 -BET方法表征获得的样品。根据结果​​，发现环磨导致粒度进一步减小。粒度分布和 N 2 -BET 分析表明，对于 HSBVM 和环磨机，分别在 15 分钟和 5 分钟研磨时间后颗粒开始团聚。