当前位置: X-MOL 学术Appl. Clay. Sci. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Efficient photocatalysis of CrVI and methylene blue by dispersive palygorskite-loaded zero-valent iron/carbon nitride
Applied Clay Science ( IF 5.3 ) Pub Date : 2020-11-01 , DOI: 10.1016/j.clay.2020.105817
Jing Zhang , Tao Zhang , Xiaoceng Liang , Yinfei Wang , Yingying Shi , Wenya Guan , Dingyang Liu , Xijun Ma , Jianfeng Pang , Xingyong Xie , Kun Hong , Zhengyan Wu

Abstract Our previous study reported that a more dispersed palygorskite (Pal) with a multiparous structure can be fabricated from rigid nano-rods by ion beam bombardment. In this study, the new multiparous structure of Pal (MPal) was used to carry a nanocomposite prepared from graphitic carbon nitride (CN) and nano zero-valent iron (NZVI) following a simple thermopolymerisation method for the first time. The as-prepared sample (MPal/NZVI/CN) achieved broader light absorption in the visible light region and low recombination, according to the characterisation results of the UV–vis diffuse reflectance and photoluminescence (PL) spectra of the photocatalysts. The photocatalysis of CrVI and methylene blue (MB) in an aqueous solution by MPal/NZVI/CN revealed that the MPal/NZVI/CN-1:5:6 composites exhibited superior catalytic activity, with CrVI and MB removal efficiencies of 98.48% and 99.2% in 120 min, respectively. Additionally, the reaction rate constants (kCr and kMB) of MPal/NZVI/CN were much higher than those of CN, NZVI/CN, and MPal/CN because the formation of MPal and NZVI composites with CN promoted the separation of photo-generated electron-hole pairs. After four cycles, MPal/NZVI/CN exhibited great photoactivity, which could not only be attributed to the improved dispersion of MPal, but also to the ability of the photo-generated electrons of CN to reduce the FeIII/FeII to Fe0. This study opens new opportunities for modifying photocatalysts using the inorganic nanomaterials readily formed by physical irradiation.

中文翻译:

分散的坡缕石负载零价铁/氮化碳高效光催化六价铬和亚甲蓝

摘要 我们之前的研究报告称,可以通过离子束轰击由刚性纳米棒制造出具有多晶结构的更分散的坡缕石 (Pal)。在这项研究中,Pal (MPal) 的新多晶结构首次用于承载由石墨氮化碳 (CN) 和纳米零价铁 (NZVI) 制备的纳米复合材料,该复合材料首次采用简单的热聚合方法。根据光催化剂的紫外-可见漫反射和光致发光 (PL) 光谱的表征结果,所制备的样品 (MPal/NZVI/CN) 在可见光区域实现了更宽的光吸收和低复合。MPal/NZVI/CN 对水溶液中 CrVI 和亚甲蓝 (MB) 的光催化表明 MPal/NZVI/CN-1:5:6 复合材料表现出优异的催化活性,在 120 分钟内,CrVI 和 MB 的去除效率分别为 98.48% 和 99.2%。此外,MPal/NZVI/CN 的反应速率常数(kCr 和 kMB)远高于 CN、NZVI/CN 和 MPal/CN,因为 MPal 和 NZVI 与 CN 形成的复合材料促进了光生物质的分离。电子-空穴对。四个循环后,MPal/NZVI/CN 表现出很大的光活性,这不仅归因于 MPal 分散性的改善,而且还归因于 CN 的光生电子将 FeIII/FeII 还原为 Fe0.3 的能力。这项研究为使用通过物理辐射容易形成的无机纳米材料改性光催化剂开辟了新的机会。MPal/NZVI/CN 的反应速率常数 (kCr 和 kMB) 远高于 CN、NZVI/CN 和 MPal/CN,因为 MPal 和 NZVI 与 CN 形成的复合材料促进了光生电子的分离。孔对。四个循环后,MPal/NZVI/CN 表现出很大的光活性,这不仅归因于 MPal 分散性的改善,而且还归因于 CN 的光生电子将 FeIII/FeII 还原为 Fe0.3 的能力。这项研究为使用通过物理辐射容易形成的无机纳米材料改性光催化剂开辟了新的机会。MPal/NZVI/CN 的反应速率常数(kCr 和 kMB)远高于 CN、NZVI/CN 和 MPal/CN,因为 MPal 和 NZVI 与 CN 的复合物促进了光生电子的分离。孔对。四个循环后,MPal/NZVI/CN 表现出很大的光活性,这不仅归因于 MPal 分散性的改善,而且还归因于 CN 的光生电子将 FeIII/FeII 还原为 Fe0.3 的能力。这项研究为使用通过物理辐射容易形成的无机纳米材料改性光催化剂开辟了新的机会。这不仅可以归因于 MPal 分散性的改善,还可以归因于 CN 的光生电子将 FeIII/FeII 还原为 Fe0.3 的能力。这项研究为使用通过物理辐射容易形成的无机纳米材料改性光催化剂开辟了新的机会。这不仅可以归因于 MPal 分散性的改善,还可以归因于 CN 的光生电子将 FeIII/FeII 还原为 Fe0.3 的能力。这项研究为使用通过物理辐射容易形成的无机纳米材料改性光催化剂开辟了新的机会。
更新日期:2020-11-01
down
wechat
bug