Abstract In this study, the red-emitting phosphor-in-glass (PiG) using the CaAlSiN3: Eu2+ (CASN) phosphor is reported for the first time. The CASN: Eu2+ PiG samples with a maximum luminous flux of 25.1 to 29.4 for l minute at laser power of 1 W/mm2 was obtained using a low-temperature glass frit and GPS furnace. Despite the increase in the phosphor from 15 to 25 wt%, the PiG produced at low temperature of 380 oC showed robust properties. Finally, the red PiG module designed for rear lamp applications maintains over 90 % lumens for a minute at 350 mA and achieves an intense red light having a color temperature of 4589 K.

中文翻译：

---

通过玻璃中磷光体方法制造发红光的 CaAlSiN3:Eu2+ 用于后组合灯

摘要 在这项研究中，首次报道了使用 CaAlSiN3:Eu2+ (CASN) 荧光粉的玻璃中发红光荧光粉 (PiG)。CASN：使用低温玻璃料和 GPS 熔炉在 1 W/mm2 激光功率下获得最大光通量为 25.1 至 29.4 的 Eu2+ PiG 样品，持续 1 分钟。尽管磷光体的重量百分比从 15% 增加到 25%，但在 380 oC 的低温下生产的 PiG 显示出强大的性能。最后，专为尾灯应用设计的红色 PiG 模块在 350 mA 下保持超过 90% 的流明一分钟，并实现色温为 4589 K 的强烈红光。